Hampshire · England
Bath Re-enamelling in Liphook
Local bath re-enamelling for Liphook: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A roll-top that is seen better days
Questions from Liphook
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Bath re-enamelling in Liphook without replacing anything
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on cast iron baths, basins & shower trays and Victorian roll-tops, and common reasons people get in touch are worn patches where water runs and sits and chips and rust in more than one place.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Where
- Liphook (GU30)
- Area hub
- Hampshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Common problems we fix in Liphook
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
The most common problems we’re called about are:
- An outdated colour you’d like to change
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- A dull, rough surface that will not come clean
Before booking anyone
- What happens if they find more damage
- Whether there are any call-out or travel charges
- How your room will be protected
- Whether they match the colour on site
Our work in Liphook
Liphook is about 8 miles north-east of Petersfield, in Hampshire. From the centre of Liphook to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 683 places in Hampshire. You can also see our page for London, about 42 miles away.
All of GU30 is covered, from the main roads to the quietest streets. Local streets include London Road, Station Road and Childerstone Close, all of which we cover. Nearby, we also work in Weavers Down (1 mile west), Conford (1 mile north-west), Passfield (2 miles north-west), Milland (3 miles south) and Longmoor (3 miles west). We also work in nearby towns such as Farnborough (15 miles north), Fleet (14 miles north), Horndean (15 miles south-west), Aldershot (12 miles north), Alton (9 miles north-west) and Petersfield (8 miles south-west).
What’s near Liphook
Locally, our jobs take us to homes close to St Mary's Church Centre, The Green Dragon Public House and Bohunt School. Liphook’s nearest station is Liphook station, about 0.5 miles south. Nearby you will also find Chase Community Hospital (3.3 miles north-west). Not far away are Lynchmere Commons and Wheeler's Down.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
What happens on the day
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Keep a parking space free if you can
- Ensure the area is dry
- Keep pets and children out of the room while we work
Getting a price
Upload a picture of the damage and one of the whole item, with your GU30 postcode, and we’ll reply with a fixed quote.
Advice
Landlord and trade work in Liphook
For anyone letting property in or around Liphook, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Towns and villages near Liphook
More services for Liphook
What bath re-enamelling costs
Prices start from £350. There is no charge for travel to Liphook. The price depends on:
- How hard the colour is to match
- Access to the area
- The material and finish
- How much damage there is
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- One picture of the whole bath
- Your postcode, so we can check dates
To get a price, send two or three photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Liphook customers choose us
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
Take a look at our full price list or guide to resurfacing and replacement costs.
What we can’t put right
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
