Lisburn · Northern Ireland
Bath chip & crack repair in Lisburn
Bath repair in Lisburn without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Repairs from £95
- Rust spots around the plughole
- A kit repair that didn’t last
About our bath repair in Lisburn
Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. Our repair technicians work on roll-top & freestanding, cast iron enamel and acrylic, and common reasons people get in touch are scratches you can feel with a fingernail and chips on the rim or sides.
Big or small, it’s backed by a one-year guarantee in Lisburn and the surrounding area.
- Area
- Lisburn (BT27)
- Region
- Lisburn
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Lisburn
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can you quote from photos?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
When to call us in Lisburn
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.
Most people contact us when they notice one of these:
- Rust by the waste and overflow
- Snagging damage from a refit
- Scuffs and scratches in the surface
- Cracks in an acrylic bath
Questions to ask before you book
- How soon you can use it again
- Whether cleaning and preparation are in the price
- What happens if the damage is worse than the pictures show
- What the guarantee covers, and for how long
Where we work around Lisburn
Lisburn is in Northern Ireland. Book a date that suits you, and you will know when to expect us, so there’s no waiting around.
Postcode districts we cover here: BT27. Other places close to Lisburn include Dunmurry (3 miles north), Carryduff (5 miles north-east), Belfast (7 miles north-east), Ballynahinch (9 miles south-east) and Newtownabbey (12 miles north). If you’re somewhere remote, ring us first and we’ll plan the trip.
Local landmarks in Lisburn
We visit homes around The Old Castle pub, Hillhall Presbyterian Church and Largymore Primary School and the streets around them. You’ll also find Lisnagarvey High School (1.5 miles west) and Wallace Park (0.8 miles north-west). Further afield, we also cover the area around Hillsborough Castle (4.3 miles south-west) and Lagan Valley Hospital (1.1 miles west). Not far away are Belshaw's Quarry Nature Reserve.
Landlords, agents and businesses in Lisburn
Housing associations and facilities teams use us for planned and reactive repairs in Lisburn and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Landlords, letting agents and housing providers in Lisburn use us as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
What we do, step by step
Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, and we leave the room as we found it.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the next day.
How to prepare
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
- Point us to the nearest place to park
Getting a price
To get a price, send two or three photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Advice
Prices and what affects them
Prices start from £95. There is no charge for travel to Lisburn. The price comes down to:
- How many areas need work
- Whether old repairs or coatings need taking off
- The colour and finish to match
- What kind of damage it is
We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
The better the photos, the more accurate the price. Here’s what helps:
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- Details of any past repairs
- A picture taken from further back
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Honest limits
To be straight with you, there are a few things a repair will not fix:
- Wear across the whole surface, which needs re-enamelling
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we can’t get to from below
Send us pictures and we will tell you honestly before booking.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Clean with warm water and a mild detergent
- Get any new chip repaired before it rusts
- Fix dripping taps early to stop staining and limescale
- Give the bath a quick rinse after use
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
Also near Lisburn
Also in Lisburn
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
