Nottinghamshire · England

Bath Repair for Little Gringley homes

Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Little Gringley. Free, fixed quotes from your pictures.

  • Repairs from £95
  • A kit repair that didn’t last
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Little Gringley homes

Our work in Little Gringley

Little Gringley is about 2 miles east of Retford, in Nottinghamshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. We cover 329 places across Nottinghamshire, from the larger towns to small villages. You can also see our page for Leeds, about 43 miles away.

We work across DN22 and the streets around it. We also travel to Welham (1 mile north), Retford (2 miles west), Clarborough (2 miles north), Bolham (2 miles north-west) and Ordsall (2 miles west). Further out, we also cover Worksop (9 miles west), Shirebrook (15 miles south-west), Market Warsop (13 miles south-west), New Ollerton (9 miles south-west), Kilton (8 miles west) and Creswell (14 miles west).

Near you in Little Gringley

Locally, our jobs take us to homes close to Hop Pole pub, Bracken Lane Primary Academy and St Helen's Church and the streets around them. For rail, the closest station is Retford station, roughly 1.7 miles west. Nearby you will also find Rampton Secure Hospital (3.5 miles south-east) and Grove Castle Hill (0.7 miles east). Open spaces near Little Gringley include Bellmoor Lake and Idle Valley Nature Reserve.

Map of Little Gringley © OpenStreetMap contributors

About our bath repair in Little Gringley

Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. Whether it’s rusty patches near the plughole and holes from dropped items, we can generally put it right, on cast iron enamel, roll-top & freestanding and acrylic alike.

Your repair is guaranteed for a year, as with every job we do.

Rusty chip next to a bath plughole, before and after repair
Where
Little Gringley (DN22)
Area hub
Nottinghamshire
Warranty
A year, on every repair
Price
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026

What bath repair costs

Repairs from £95. We give every job a fixed price from photos. These are the things that affect it:

  • How easy the damage is to reach
  • Whether old repairs or coatings need taking off
  • What kind of damage it is
  • The colour and finish to match

What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Quotes from your pictures

You can typically get a fixed quote without us visiting. To help us price it:

  • Whether it’s been repaired or coated before
  • One sharp close-up of the damage
  • The postcode, so we can plan the visit
  • A picture taken from further back

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

How to care for the repair

Much of the damage we repair could have been avoided. A few tips:

  • Get any new chip repaired before it rusts
  • Check that an acrylic bath does not move when you stand in it
  • Don’t leave razors or cans standing in the bath
  • Use a soft cloth and washing-up liquid for everyday cleaning

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.

Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.

FAQs for Little Gringley

What if the damage is worse than the photos show?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Can you redo someone else’s repair?

Most of the time. Tell us what was done before.

What about rust by the waste?

Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.

I tried a repair kit. Can you fix it?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

Is my repair covered?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.

Is there any odour?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum.

Repair or replace in Little Gringley?

Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

Why Little Gringley clients choose us

  • Same prices wherever you are
  • A fixed quote before booking
  • Everything repaired in place
  • Most jobs done in one visit

Read our prices page or bath cost comparison.

What we’re called out for in Little Gringley

Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.

Typical reasons for a call-out include:

  • Hairline or through cracks in acrylic
  • Chips along the edge of the bath
  • Snagging damage from a refit
  • Impact holes in acrylic

Before you book anyone

  • Whether they match the colour on site
  • Whether the price covers travel
  • Who turns up on the day
  • How the room is protected while they work

10 questions to ask before you book

Different materials, different repairs

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

How the visit works

You do not need to empty the room. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take a few hours, and you can get on with other things while we’re there.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, generally the day after.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Keep a parking space free if you can
  • Make sure the area is dry

Ask for a price

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.

Get a free quote

Read more

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.

We work for landlords, letting agents and housing providers in Little Gringley as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.