Bath and North East Somerset · England
Bath chip & crack repair in Littleton, Bath and North East Somerset
Bath repair across Littleton and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Rusty patches near the plughole
- Hairline or through cracks in acrylic
Bath repair in Littleton without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. If you are dealing with damage done while the bathroom was being fitted and a failed DIY repair that’s discoloured or lifting, we can usually put it right, whatever the material.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Area
- Littleton (BS40)
- County
- Bath and North East Somerset
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Littleton
Littleton is about 6 miles south of Bristol, in Bath and North East Somerset. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Littleton is one of 136 towns and villages in Bath and North East Somerset we cover.
Jobs in BS40 work the same way as everywhere else we cover. We also travel to Upper Littleton (1 mile north-west), Hounsley Batch (1 mile west), Chew Stoke (1 mile south), Chew Magna (1 mile east) and Regil (1 mile south-west). Further out, we also cover Bath (12 miles east), Keynsham (7 miles north-east), Bathwick (12 miles east), Walcot (12 miles east), Westmoreland (11 miles east) and Kingsmead (11 miles east).
Landmarks near Littleton
We visit homes around St Andrew's Church and Chew Valley School. The closest station to Littleton is Parson Street station, about 4.5 miles north of the centre. Well-known places in the area include Oval enclosure (3.7 miles south-east) and Barrow Hospital (3.5 miles north). Not far away are Dundry Hill.
Towns and villages near Littleton
More services for Littleton
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes two to three hours for most chips. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the following day.
Before we arrive
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
- Point us to the nearest place to park
How to get a price
Upload a picture of the damage and one of the whole item, and tell us you’re in Littleton, and we will come back with a fixed quote.
Read more
When we’d advise against a repair
It helps to know what we can’t do:
- Cracks in acrylic we cannot reach from underneath
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Littleton: your questions answered
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one.
What happens if you find more damage?
The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
I tried a repair kit. Can you fix it?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Do you come to Littleton?
Yes, we do. Repair technicians travel to Littleton from across the region, and the price is the same as everywhere else.
Can you repair several things at once?
Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
What affects the price in Littleton
Prices start from £95. Every quote is fixed and free. What we take into account:
- Whether old repairs or coatings need taking off
- The material
- The colour and finish to match
- How many areas need work
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Send pictures for a quote
Two or three clear photos are typically enough. It helps if you send:
- The material, if you know it
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
If you are in Littleton and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Do not leave a fresh chip for long
- Give the bath a quick rinse after use
- Keep metal cans and razors off the surface
- Clean with warm water and a mild detergent
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Repair or replace: which is better?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before you book
- Colours mixed by hand to suit your surface
- Work done at your home or business
Take a look at our prices page or resurfacing vs replacement cost guide.
When to call us in Littleton
Rust usually starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
It’s worth getting a quote if you see:
- A kit repair that didn’t last
- Cracks in an acrylic bath
- Rust by the waste and overflow
- A chipped rim or side
What to look for in a quote
- Whether they match the colour on site
- What preparation is included
- How long it needs to cure
- Is the price fixed, and does it include VAT?
About our accreditations · Every repair comes with a one-year guarantee.
