Cardiff · Wales

Bath Repair in Llanedeyrn Village

We travel to Llanedeyrn Village for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • A hole punched through by something heavy
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Llanedeyrn Village

When to call us in Llanedeyrn Village

Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.

Typical reasons for a call-out include:

  • A kit repair that didn’t last
  • Rust by the waste and overflow
  • Chips on the rim or sides
  • Impact holes in acrylic

What your quote should include

  • How soon you can use it again
  • What the guarantee covers, and for how long
  • What prep work is covered
  • How the room is protected while they work

How to compare quotes

About our bath repair in Llanedeyrn Village

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair acrylic, cast iron enamel and roll-top & freestanding, and the jobs we see most are a chipped rim or side and hairline or through cracks in acrylic.

A one-year guarantee comes as standard, so you’re covered after the visit.

Location
Llanedeyrn Village (CF3)
Area hub
Cardiff
Warranty
One year on every repair
Quotes
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Keep abrasive pads and gritty cleaners away from the bath
  • Rinse it down after each bath
  • If an acrylic bath flexes, have its feet adjusted
  • Protect the bath with a towel when doing jobs nearby

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.

A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

Llanedeyrn Village questions

What happens once I’ve sent pictures?

We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

Can you redo an old repair?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

How do I get a price for bath repair in Llanedeyrn Village?

Prices start from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.

How long before I can use the bath?

Typically the following day. We confirm the time before we leave.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you fix rust around the plughole?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

Materials and what they mean for the repair

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.

Repairing versus replacing in Llanedeyrn Village

Replacing a fitted bath usually means a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Prices start from £95. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Llanedeyrn Village

  • CHAS and Constructionline accredited
  • We come to you, anywhere in the UK
  • Fixed prices from your pictures
  • Same prices wherever you are

See our prices page and resurfacing vs replacement cost guide.

Covering Llanedeyrn Village

Llanedeyrn Village (Welsh: Pentref Llanedeyrn) is about 4 miles north-east of Cardiff, in Cardiff. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Llanedeyrn Village is one of 91 towns and villages in Cardiff we cover.

We cover every part of the CF3 postcode area. Local streets include Church Road, Rees Drive and Potter Street, and we cover them all. We also cover the places around Llanedeyrn Village: Old St Mellons (1 mile east), Pontprennau (1 mile west), Pentwyn (1 mile south-west), Began (1 mile north-east) and Llanrumney (1 mile south). We also work in nearby towns such as Cardiff (4 miles south-west), Ely (7 miles south-west), Castle (4 miles south-west), Adamsdown (4 miles south-west), Roath (4 miles south-west) and Splott (4 miles south).

Near you in Llanedeyrn Village

Typical jobs here are in homes near The Unicorn pub, Llanrumney High School and St Edeyrn's Church. Nearby too are St Mellon's Church (0.8 miles south-east) and St Cadoc's Primary School (0.7 miles south). Llanedeyrn Village’s nearest station is Llanishen station, about 2.5 miles west of the centre. A little further out are University Dental Hospital on Cardiff University (3.6 miles south-west) and Cefn Mably House (0.9 miles north). Open spaces near Llanedeyrn Village include Craig Llysfaen and Roath Park Lake.

Map of Llanedeyrn Village © OpenStreetMap contributors

Work for landlords and builders

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

What happens on the day

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for a few hours from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the following day.

Getting ready for the visit

  • Plan for the room to be out of bounds to pets and children
  • Let us know if it has been repaired before
  • Mention any parking restrictions or tricky access

Getting a price

Most customers in Llanedeyrn Village get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Get a free quote

Related advice

DIY repairs versus a professional job

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

When a repair is not the answer

To be straight with you, some problems need a different fix:

  • A bath worn all over, where resurfacing makes more sense
  • Leaking fittings, which need a plumber
  • Cracks in parts of an acrylic bath we can’t get to from below

Send us pictures and we’ll tell you honestly.

Materials we repair

  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.