Isle of Anglesey · Wales

Bath chip & crack repair in Llangeinwen, Isle of Anglesey

Our technicians come to Llangeinwen for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Llangeinwen

Your questions about bath repair in Llangeinwen

I’m a tenant. Can you help?

Of course. Ask your landlord first, and we can send them the quote if that helps.

How long before I can use the bath?

Normally by the following day, though it depends on what we’ve done.

Can you price it without visiting?

Generally, yes. Clear pictures let us give you a fixed price without visiting.

Will the repair last?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.

How much does bath repair cost in Llangeinwen?

Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.

Can you repair something that’s been repaired before?

Yes, regularly. Removing the old work can add time, and that is in the quote.

Can you repair a hole in a bath?

Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Bath repair in Llangeinwen without replacing anything

Most of our bath repairs take a few hours, and you can generally bathe again the next day. There is no need to book a plumber or tiler, because nothing is disconnected. We work on roll-top & freestanding, pressed steel enamel and cast iron enamel, and the jobs we see most are chips on the rim or sides and a kit repair that didn’t last.

Every repair comes with a one-year guarantee, wherever you are in Isle of Anglesey.

Location
Llangeinwen (LL61)
Region
Isle of Anglesey
Cover
One year on every repair
Price
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

Aftercare tips

How the surface is treated afterwards matters:

  • Rinse the bath after use, especially in hard water areas
  • Store metal items away from the bath
  • Stick to mild cleaners and a soft cloth
  • Keep abrasive pads and gritty cleaners away from the bath

Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.

Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.

The process

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take two to three hours for most chips. We clean up when we’re done and tell you when it’s ready to use.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Getting ready for the visit

  • Let us know about parking or access
  • Tell us about any previous repairs or coatings
  • Let the surface dry out before the visit

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a fixed quote

Related advice

Llangeinwen and the surrounding area

Llangeinwen is about 3 miles north-west of Caernarfon, in Isle of Anglesey. Whether you are in the middle of Llangeinwen or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Llangeinwen is one of 115 towns and villages in Isle of Anglesey where we work. Our nearest city page is Liverpool, about 61 miles away.

We work across the LL61 postcode area. Streets in the area include Glan Dwr and Ger-y-Felin, and we cover them all. If you are just outside Llangeinwen, we cover Dwyran (1 mile east), Pen-Lôn (1 mile south-west), Newborough (1 mile west), Llangaffo (2 miles north) and Brynsiencyn (3 miles east). Larger places within reach include Blackbridge (15 miles north-west), Llangefni (6 miles north), Menai Bridge (8 miles north-east), Porthaethwy (8 miles north-east), Morawelon (15 miles north-west) and Llanfair Pwllgwyngyll (7 miles north-east).

What’s near Llangeinwen

In Llangeinwen, that means homes near White Lion pub, St Ceinwen's Church and Ysgol Gymuned Dwyran and the streets around them. Llangeinwen’s nearest station is Bodorgan station, roughly 4.2 miles north-west. Other landmarks nearby include Caernarfon Castle (3.1 miles south-east) and Tacla Taid Transport And Agriculture Museum (0.7 miles north-west). Not far away are Coed Helen and Llyn Rhos-ddu.

  • Local facilities include Clynnog Fechan (within half a mile west)
Map of Llangeinwen © OpenStreetMap contributors

Should you replace it?

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why book with us

  • Typically one visit, start to finish
  • Repair technicians who travel to you, UK-wide
  • Straight answers about what a repair can do
  • No need to remove anything

Take a look at our prices page and bath cost comparison.

Signs you need bath repair in Llangeinwen

Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.

If you can see any of these, send us a photo:

  • A chipped rim or side
  • Rust spots around the plughole
  • Scratches you can feel with a fingernail
  • Damage beneath the taps

Questions to ask before booking

  • If travel is included in the price
  • A fixed price, and whether VAT is included
  • When it can be used again
  • What the guarantee covers, and for how long

Choosing a repair company

Landlord and trade work in Llangeinwen

Landlords, letting agents and housing providers in Llangeinwen use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

What your bath is made of matters

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

What bath repair costs

Repairs from £95. Each job gets its own fixed quote. This is what makes a difference:

  • Whether it’s a chip, crack, burn or wear
  • Where the damage is and how we get to it
  • Unusual colours or finishes
  • How many areas need work

The price reflects the work involved, not where you live. The full price is agreed before you book.

Quotes from your photos

Photographing the damage takes a minute, and it saves a visit. Please include:

  • A wider photo showing the entire bath
  • Your postcode, so we can check dates
  • Something in shot to show the size
  • Natural light rather than flash

For a price in Llangeinwen, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

When we’d advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Metal that has corroded all the way through
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Flexing caused by a failed cradle or loose feet

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding
  • Cast iron enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.