Wrexham · Wales

Bath Repair for Llwyneinion homes

Problem with your bath in Llwyneinion? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Chips under the taps
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Llwyneinion

Bath repair in Llwyneinion, done in place

Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, usually in a single visit. Our repair technicians work on acrylic, roll-top & freestanding and whirlpool & spa baths, and people most frequently call us about rust by the waste and overflow and hairline or through cracks in acrylic.

All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.

Location
Llwyneinion (LL14)
County
Wrexham
Warranty
A year, on every repair
Price
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

What bath repair costs

Repairs from £95. There’s no charge for travel to Llwyneinion. The price comes down to:

  • Unusual colours or finishes
  • The material and finish
  • How much damage there is
  • Any earlier repairs that need removing first

A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Send photos for a quote

Two or three clear photos are typically enough. It helps if you send:

  • The postcode, so we can plan the visit
  • One picture of the whole bath
  • Something in shot to show the size
  • Natural light rather than flash

Most customers in Llwyneinion get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

How to look after the repair

A little care keeps the finish looking good. Our advice:

  • Check that an acrylic bath does not move when you stand in it
  • Have new chips seen to early
  • Keep metal cans and razors off the surface
  • Stick to mild cleaners and a soft cloth

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

Llwyneinion and the surrounding area

Llwyneinion is about 4 miles south-west of Wrexham, in Wrexham. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Llwyneinion is one of 115 places in Wrexham we cover. You can also see our page for Liverpool, about 27 miles away.

Our repair technicians cover all of LL14. Other places close to Llwyneinion include Talwrn (1 mile east), Aber-oer (1 mile north), Ponciau (1 mile south-east), Pentredŵr (1 mile south) and Rhosllannerchrugog (1 mile south-east). Within a short drive, we also cover Wrexham (4 miles north-east), Caia Park (4 miles north-east), Offa (3 miles north-east), Rhosddu (3 miles north-east), Acton (4 miles north-east) and Little Acton (4 miles north-east).

Near you in Llwyneinion

In Llwyneinion, that means homes near Ysgol Maes Y Mynydd, Coach & Horses Inn and Ysgol-Y-Grango, among other places. Nearby too are St David's Welsh Church (0.8 miles south) and Nant Mill (1.5 miles north). Llwyneinion’s nearest station is Ruabon station, roughly 2.5 miles south of the centre. Further afield, we also cover the area around Tŷ Pawb (3.4 miles north-east) and Cadwgan Castle (0.9 miles north-east). For a walk, there is Bersham Bank and Monks Pool.

Map of Llwyneinion © OpenStreetMap contributors

Landlords, agents and businesses in Llwyneinion

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

FAQs for Llwyneinion

Something went through my bath. Can it be fixed?

In most cases. Photos of the hole and the underside help us check.

Is there a guarantee?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Can you repair a failed DIY repair?

Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.

What if the damage is worse than the photos show?

Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.

How long before I can use the bath?

Normally by the following day, depending on the repair.

Can a cracked acrylic bath be fixed?

In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

How quickly can you book me in?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Signs you need bath repair in Llwyneinion

A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.

The things clients generally mention when they call include:

  • Chips along the edge of the bath
  • An old repair that has yellowed or come loose
  • Damage beneath the taps
  • Rust spots around the plughole

Questions to ask before booking

  • How long it needs to cure
  • How the colour is matched
  • What happens if the damage is worse than the pictures show
  • How to care for the finish

Choosing a repair company

What we cannot put right

To be straight with you, some problems need a different fix:

  • Cracks in parts of an acrylic bath we cannot get to from below
  • Rust that has eaten right through a steel bath
  • Wear across the whole surface, which needs re-enamelling

If in doubt, send photos and we will say what we think before you book.

Materials we work on in Llwyneinion

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel

How it works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a morning or an afternoon. We clean up when we’re done and tell you when it’s ready to use.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the following day.

Getting ready for the visit

  • Mention any earlier repairs or resurfacing
  • Point us to the nearest place to park
  • Let us know about parking or access

Getting a price

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.

Send pictures for a quote

Related advice

Should you replace it?

Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in one visit. Repairs from £95, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.

Why Llwyneinion customers choose us

  • Usually one visit, start to finish
  • We come to you, anywhere in the UK
  • Fixed prices from your photos
  • Accredited with CHAS, Constructionline and SafeContractor

Read our pricing or bath cost comparison.

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.