Southampton · England

Bath chip & crack repair in Lordswood, Southampton

Bath repair across Lordswood and nearby, usually in one visit and guaranteed for a year.

  • Repairs from £95
  • Cracks in an acrylic bath
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Lordswood

Repairing versus replacing in Lordswood

A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.

Why Lordswood clients choose us

  • CHAS, Constructionline and SafeContractor accredited
  • Colours mixed by hand to suit your surface
  • Normally one visit, start to finish
  • A fixed quote before you book

Take a look at our prices page and resurfacing vs replacement cost guide.

How we handle bath repair in Lordswood

We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. If you’re dealing with rust spots around the plughole and a cracked acrylic bath, we can usually put it right, on roll-top & freestanding, pressed steel enamel and acrylic alike.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Area
Lordswood (SO16, SO15)
County
Southampton
Cover
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

How the visit works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours, depending on the damage. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the day after.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Point us to the nearest place to park
  • Ensure the area is dry

Get a quote

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Get a free quote

Read more

Materials and what they mean for the repair

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.

Prices and what affects them

Prices start from £95. A fixed quote means you know the cost before you book. We take into account:

  • What the surface is made of
  • The colour and finish to match
  • Access to the area
  • How many items we do on one visit

Our prices are the same across the UK, with no extra for Lordswood. The job itself decides the price: the material, the amount of damage and how many items.

How to get a fixed quote

A couple of clear pictures is all it takes. Try to include:

  • A clear, close picture of the problem area
  • Whether it’s been repaired or coated before
  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection

Upload a picture of the damage and a wider shot of the whole item, and tell us you are in Lordswood, and we will come back with a fixed quote.

Landlords, agents and businesses in Lordswood

If you manage property in Lordswood, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.

Common questions in Lordswood

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

How do I get a price for bath repair in Lordswood?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Can rust on a bath be repaired?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

Can you repair a chip on a coloured bath?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Is a holed acrylic bath repairable?

Normally. Send us a photo of the hole and one from under the bath if you can.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

Our work in Lordswood

Lordswood is about 2 miles north-west of Southampton, in Southampton. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 40 places in Southampton. Our jobs stretch from Lordswood to London (about 69 miles away).

Every address in SO16 and SO15 is covered, from the main roads to the quietest streets. Local streets include Peach Road, Linden Road and Woburn Road. If you are just outside Lordswood, we cover Coxford (1 mile south-west), Bassett (1 mile east), Rownhams (1 mile north-west), Maybush (1 mile south-west) and Chilworth (1 mile north-east). Larger places within reach include Townhill Park (3 miles east), Midanbury (3 miles east), Thornhill (5 miles south-east), Chartwell Green (4 miles east), Harefield (4 miles south-east) and Itchen (4 miles south-east).

Near you in Lordswood

Our clients here include homes close to Bridge Tavern, St James' Park and Lord's Hill Church, among other places. You will also find Oaklands Community School (1 mile west), Oakwood Primary School (under half a mile north-west) and Upper Shirley High School (1 mile south). Lordswood’s nearest station is Millbrook (Hants) station, roughly 2.2 miles south. Nearby you’ll also find Marlands Shopping Centre (2.8 miles south-east) and Princess Anne Hospital (0.5 miles south). The countryside around Lordswood includes Testwood Lakes.

Map of Lordswood © OpenStreetMap contributors

Can I fix it myself?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

Common problems we fix in Lordswood

Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.

These are the problems we are asked about most:

  • A failed DIY repair that’s discoloured or lifting
  • Hairline or through cracks in acrylic
  • Rusty patches near the plughole
  • Damage beneath the taps

Comparing quotes

  • Whether cleaning and preparation are in the price
  • How to look after the finish
  • What happens if they find more damage
  • Whether they match the colour on site

Choosing a repair company

Aftercare tips

So the finish stays in good condition:

  • Have new chips seen to early
  • If an acrylic bath flexes, have its feet adjusted
  • Cover the bath during DIY or decorating
  • Use a soft cloth and washing-up liquid for everyday cleaning

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.

Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.