Southampton · England
Bath chip & crack repair in Shirley, Southampton
We travel to Shirley for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Scuffs and scratches in the surface
- A cracked acrylic bath
Do you need bath repair in Shirley?
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
These are the problems we’re asked about most:
- Damage beneath the taps
- A failed DIY repair that’s discoloured or lifting
- A cracked acrylic bath
- Chips on the rim or sides
What to look for in a quote
- How long the guarantee is and what it covers
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
- Whether there are any call-out or travel charges
Bath repair at your home in Shirley
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. We’re often asked to fix a kit repair that didn’t last and rust spots around the plughole, across roll-top & freestanding, cast iron enamel and whirlpool & spa baths.
All of our repairs are guaranteed for twelve months in Shirley and everywhere else. We return to put right any problem with the work.
- Where
- Shirley (SO15, SO16, SO17)
- County
- Southampton
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
- A bath worn all over, where resurfacing makes more sense
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
Also near Shirley
What else we do in Shirley
Shirley and nearby
Shirley is about 2 miles west of Southampton, in Southampton. We travel to clients in Shirley and the surrounding area, so you do not need to take anything anywhere. We cover 40 places across Southampton, from the larger towns to small villages. Our jobs stretch from Shirley to London (about 70 miles away).
Our visits in SO15, SO16 and SO17 work the same way as everywhere else we cover. You will find streets such as May Road, Dyer Road and York Road, and we cover them all. Shirley is on the A3057, so it’s easy for us to reach. Neighbouring places we cover include Regents Park (1 mile west), Freemantle (1 mile south), Millbrook (1 mile south-west), Coxford (1 mile north-west) and Maybush (1 mile north-west). Within a short drive, we also cover Townhill Park (3 miles east), Midanbury (3 miles east), Thornhill (4 miles east), Chartwell Green (4 miles east), Harefield (4 miles east) and Itchen (3 miles south-east). Being one of Southampton’s larger places, Shirley sees plenty of our work.
Landmarks near Shirley
In Shirley, that means homes near Millbrook Community School, St James' Park and Shirley Parish Church. You will also find Regents Park Community College (less than half a mile west), The Crown Public House (less than half a mile north-west) and Wordsworth Primary School (within half a mile north). For rail, the closest station is Millbrook (Hants) station, about 0.7 miles south of the centre. Other landmarks nearby include Netley Castle (4.4 miles south-east) and Foresters Museum & Archive (1 mile south-east). Not far away are Testwood Lakes.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Questions from Shirley
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can a cracked acrylic bath be fixed?
Usually, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Which areas do you work in?
Across the UK, and that includes Shirley. Our prices are the same everywhere.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
When can I have a bath again?
Typically within a day, though it depends on what we’ve done.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Should you replace it?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Compared with replacing, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in Shirley
- CHAS and Constructionline accredited
- Fixed prices from your photos
- Straight answers about what a repair can do
- A year’s guarantee on all work
Take a look at our full price list or resurfacing vs replacement cost guide.
For landlords and businesses
We work for landlords, letting agents and housing providers in Shirley as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Store metal items away from the bath
- Clean with warm water and a mild detergent
- Put a towel in the bath if you are working above it
- Fix dripping taps early to stop staining and limescale
There is nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a few hours, depending on the damage. Before leaving, we tell you when it can be used and how to look after it.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
