Stockton-on-Tees · England
Bath Repair for Low Worsall homes
Problem with your bath in Low Worsall? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Chips along the edge of the bath
- Deep scratches in acrylic
For landlords and businesses
Landlords, letting agents and housing providers in Low Worsall use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Bath repair at your home in Low Worsall
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We’re frequently asked to fix impact holes in acrylic and a failed DIY repair that’s discoloured or lifting, on roll-top & freestanding, acrylic and whirlpool & spa baths.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Location
- Low Worsall (TS15)
- Area hub
- Stockton-on-Tees
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Low Worsall
More services for Low Worsall
When to call us in Low Worsall
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
You may need us if you’ve spotted any of these:
- A cracked acrylic bath
- Snagging damage from a refit
- Holes from dropped items
- Deep scratches in acrylic
What your quote should include
- What prep work is covered
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the pictures show
- Whether a trained technician does the job
Common questions in Low Worsall
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How long does the repair take to cure?
Normally by the following day, depending on the repair.
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Is a holed acrylic bath repairable?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Low Worsall.
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Repair or replace in Low Worsall?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Low Worsall
- A year’s guarantee on all work
- A fixed quote before booking
- Work done at your home or business
- Nothing taken out or refitted
Read our pricing and bath cost comparison.
What we do, step by step
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes two to three hours for most chips. We tidy up before we leave and let you know when you can use it again.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
Getting a price
Upload a picture of the damage and a wider shot of the entire item, with your TS15 postcode, and we’ll reply with a fixed price.
Read more
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Rinse it down after each bath
- Have new chips seen to early
- Keep metal cans and razors off the surface
- If an acrylic bath flexes, have its feet adjusted
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and rinse after use.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Prices and what affects them
Repairs from £95. There is no charge for travel to Low Worsall. The price comes down to:
- Any earlier repairs that need removing first
- Unusual colours or finishes
- How many areas need work
- Whether it’s a chip, crack, burn or wear
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- Something in shot to show the size
- Your postcode, so we can check dates
- The material, if you know it
- Any earlier repairs or coatings
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Our work in Low Worsall
Low Worsall is about 2 miles south-west of Yarm, in Stockton-on-Tees. Our technicians come to homes and businesses in Low Worsall and the surrounding area, so there’s no workshop to go to. We work in all 31 towns and villages across Stockton-on-Tees. Our jobs stretch from Low Worsall to Newcastle upon Tyne (36 miles away).
All of TS15 is covered, from the main roads to the quietest streets. You will find streets such as Village Road, Tofts Close and De Brus Close. We also cover the places around Low Worsall: Yarm (2 miles north-east), Kirklevington (2 miles east), Appleton Wiske (3 miles south), West Rounton (4 miles south) and Welbury (5 miles south). Further out, we also cover Stockton-on-Tees (7 miles north), Billingham (10 miles north-east), Ingleby Barwick (4 miles north-east), Thornaby-on-Tees (6 miles north-east), Egglescliffe (3 miles north-east) and Elm Tree Farm (7 miles north).
Near you in Low Worsall
We visit homes around Church of All Saints, Conyers School and The Ship pub, among other places. Low Worsall’s nearest station is Yarm station, roughly 1.9 miles north-east of the centre. Nearby you will also find Yarm Castle (2.4 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
