Dorset · England

Bath Repair for Lower Ansty homes

Bath repair in Lower Ansty without the cost of replacing. Get a fixed price from your photos, then we come to you.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • Holes from dropped items
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Lower Ansty?

Bath repair at your home in Lower Ansty

We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. We’re often asked to fix a failed DIY repair that’s discoloured or lifting and damage done while the bathroom was being fitted, in pressed steel enamel, cast iron enamel and roll-top & freestanding.

Big or small, you get the same one-year guarantee.

Area
Lower Ansty (DT2)
Region
Dorset
Warranty
A year, on every repair
Quotes
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Common problems we fix in Lower Ansty

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

Send us a photo if you notice any of these:

  • Rusty patches near the plughole
  • Hairline or through cracks in acrylic
  • Chips caused by builders
  • Chips under the taps

What your quote should include

  • Who will actually do the work
  • Whether the price covers travel
  • Whether cleaning and preparation are in the price
  • What protection goes down before work starts

Our hiring checklist

How we price bath repair

Repairs from £95. There’s no area surcharge for Lower Ansty. The price reflects:

  • Any earlier repairs that need removing first
  • Whether we combine several jobs
  • The colour and finish to match
  • How easy the damage is to reach

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Send photos for a quote

It only takes a minute to photograph the damage. Please include:

  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size
  • A clear, close picture of the problem area
  • Your postcode, so we can check dates

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Our work in Lower Ansty

Lower Ansty is about 8 miles west of Blandford Forum, in Dorset. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Lower Ansty is one of 462 places in Dorset we cover.

Every address in DT2 is covered. We regularly work on streets such as Hartfoot Lane and Cothayes Drove. If you’re just outside Lower Ansty, we cover Ansty (1 mile south-west), Melcombe Bingham (1 mile south-west), Higher Ansty (1 mile north-east), Little Ansty (1 mile north) and Cross Lanes (1 mile south-west). Larger places within reach include Dorchester (9 miles south-west), Blandford Forum (8 miles east), Gillingham (15 miles north), Shaftesbury (14 miles north-east), Sherborne (12 miles north-west) and Corfe Mullen (14 miles east).

What’s near Lower Ansty

Locally, our jobs take us to homes close to Church of St Andrew and Milton Abbey School, among other places. Other landmarks nearby include Brewery Farm Museum (2.6 miles east). The countryside around Lower Ansty includes Bulbarrow Hill.

Map of Lower Ansty © OpenStreetMap contributors

What a repair can’t fix

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Rust that has eaten right through a steel bath
  • Cracks in parts of an acrylic bath we cannot get to from below

Send us photos and we’ll tell you honestly.

Surfaces we repair

  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

For anyone letting property in or around Lower Ansty, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

FAQs for Lower Ansty

What happens once I’ve sent pictures?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Can you match an avocado or pink bath?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

Is a holed acrylic bath repairable?

In most cases. Send us a photo of the hole and one from under the bath if you can.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

How quickly can you book me in?

That depends on our diary for your area. We will offer you dates when we send your quote.

Do the materials smell?

It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.

Should you replace it?

If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Lower Ansty

  • Dust sheets down, tidy finish
  • One price list for the whole UK
  • We come to you, anywhere in the UK
  • CHAS and Constructionline accredited

Read our prices page or resurfacing vs replacement cost guide.

Materials and what they mean for the repair

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

The process

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for a few hours. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can generally use the bath the day after.

Preparing for the visit

  • Clear the area around the damage
  • Keep children and pets away from the room on the day
  • Point us to the nearest place to park

Getting a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Send photos for a quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.