Herefordshire · England
Bath Repair for Lower Broxwood homes
Fixed-price bath repair in Lower Broxwood and the surrounding area, usually in one visit.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
How we handle bath repair in Lower Broxwood
Most of our bath repairs take a few hours, and you can generally bathe again the next day. You will not need a plumber or tiler, because the bath doesn’t move. Whether it’s rust spots around the plughole and chips caused by builders, we can help, on acrylic, cast iron enamel and whirlpool & spa baths alike.
All of our repairs are guaranteed for twelve months in Lower Broxwood and everywhere else. We return to put right any problem with the work.
- Location
- Lower Broxwood (HR6)
- Region
- Herefordshire
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath repair costs
Prices start from £95. Prices are worked out job by job. What matters most is:
- Whether old repairs or coatings need taking off
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- How many areas need work
Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
Before you send pictures, a few simple things make all the difference:
- A wider photo showing the whole bath
- Natural light rather than flash
- The postcode, so we can plan the visit
- The material, if you know it
To get a price, send a couple of pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair will not do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
For landlords and businesses
We work for landlords, letting agents and housing providers in Lower Broxwood as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
We carry out planned and one-off repairs for housing associations and facilities teams in Herefordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for a few hours. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the next day.
How to prepare
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
Get a quote
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
FAQs for Lower Broxwood
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Are there extra charges for Lower Broxwood?
There is no separate call-out charge. Your fixed quote includes everything.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Covering Lower Broxwood
Lower Broxwood is about 9 miles west of Leominster, in Herefordshire. From the centre of Lower Broxwood to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in 255 places across Herefordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 48 miles away.
We work across HR6 and the streets around it. Neighbouring places we cover include Woonton Ash (1 mile west), Moorcot (1 mile north), Woonton (1 mile south), Holme Marsh (1 mile west) and Hopley's Green (2 miles south-west). We also work in nearby towns such as Hereford (13 miles south-east), Leominster (9 miles east), Redhill (13 miles south-east), Newton Farm (13 miles south-east), Whitecross (12 miles south-east) and Eign Hill (13 miles south-east).
Local landmarks in Lower Broxwood
Our clients here include homes close to St Mary's Church and the streets around them. Other landmarks nearby include Weobley Museum (3 miles south-east) and Woonton Castle (1.7 miles south). Not far away are Birches Farm and Titley Pool.
Should you replace it?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- One price list for the whole UK
- Colours mixed by hand to suit your surface
- Fixed prices from your pictures
- Honest advice, even when it means no job
Take a look at our prices page and guide to resurfacing and replacement costs.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Signs you need bath repair in Lower Broxwood
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
The most common problems we’re called about are:
- Chips caused by builders
- Rust spots around the plughole
- Hairline or through cracks in acrylic
- A hole punched through by something heavy
Comparing quotes
- Who will actually do the work
- What happens if the damage is worse than the photos show
- Whether there are any call-out or travel charges
- How soon you can use it again
Nearby places to Lower Broxwood
Other services in Lower Broxwood
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
