Dorset · England
Bath Repair in Lower Coombe
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Lower Coombe. Send photos for a free, fixed quote.
- Repairs from £95
- Rusty patches near the plughole
- Damage done while the bathroom was being fitted
About our bath repair in Lower Coombe
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. If you are dealing with damage beneath the taps and snagging damage from a refit, we can help, whatever the material.
Every repair comes with a one-year guarantee.
- Where
- Lower Coombe (SP7)
- Region
- Dorset
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
We begin by going over the job with you, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours, and we will tell you if anything changes.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the following day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
- Ensure the room can be ventilated
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Related advice
Also near Lower Coombe
More services for Lower Coombe
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
When to call us in Lower Coombe
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
The things customers generally mention when they call include:
- Cracks in an acrylic bath
- Damage beneath the taps
- Deep scratches in acrylic
- A kit repair that didn’t last
What your quote should include
- Whether cleaning and preparation are in the price
- How the room is protected while they work
- Whether the price covers travel
- A fixed price, and whether VAT is included
Lower Coombe and the surrounding area
Lower Coombe is about 10 miles north of Blandford Forum, in Dorset. Whether you’re in the middle of Lower Coombe or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Lower Coombe is one of 462 towns and villages in Dorset we cover.
Every address in SP7 is covered, from the main roads to the quietest streets. If you’re just outside Lower Coombe, we cover Lillies Green (1 mile north-east), Ludwell (1 mile south-east), Birdbush (1 mile east), Donhead St Mary (1 mile north) and Milkwell (1 mile north-east). Within a short drive, we also cover Blandford Forum (10 miles south), Verwood (15 miles south-east), Gillingham (6 miles west), Peacemarsh (7 miles west), Sturminster Newton (9 miles south-west) and Milborne Port (14 miles west).
Landmarks near Lower Coombe
Locally, our jobs take us to homes close to St Mary's School, Ludwell Community Primary School and Church of St John the Baptist. The nearest railway station is Tisbury station, about 4.5 miles north-east of the centre. Nearby you’ll also find Gold Hill Museum (2.6 miles west) and Westminster Memorial Hospital (2.8 miles west). For a walk, there’s Breeze Hill.
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Looking after it afterwards
Once the work has cured, treat it gently:
- If an acrylic bath flexes, have its feet adjusted
- Do not leave a fresh chip for long
- Rinse the bath after use, especially in hard water areas
- Protect the bath with a towel when doing jobs nearby
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Lower Coombe: your questions answered
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
What a repair can’t fix
In fairness, there are a few things a repair won’t fix:
- Acrylic cracks with no access behind them
- Wear across the whole surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we will say what we think.
Materials we repair
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.
Why us?
- Colour mixed on the day to match
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
See our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
