Dorset · England
Bath Repair for Milkwell homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Milkwell, carried out at your home and guaranteed for a year.
- Repairs from £95
- Damage beneath the taps
- A chipped rim or side
Bath repair at your home in Milkwell
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. Typical jobs include chips on the rim or sides and rust by the waste and overflow, in roll-top & freestanding, acrylic and whirlpool & spa baths.
We stand behind the work with a one-year guarantee.
- Location
- Milkwell (SP7)
- County
- Dorset
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Milkwell
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Clients normally contact us about:
- Snagging damage from a refit
- Impact holes in acrylic
- Deep scratches in acrylic
- A chip where the taps sit
Questions to ask before you book
- If travel is included in the price
- What the guarantee covers, and for how long
- What prep work is covered
- What happens if the damage is worse than the pictures show
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Water coming from the waste or taps rather than the bath
- Cracks in parts of an acrylic bath we cannot get to from below
- A steel bath rusted through
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Repairing versus replacing in Milkwell
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why Milkwell clients choose us
- Everything repaired in place
- Fixed prices from your photos
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
Read our prices page and guide to resurfacing and replacement costs.
Milkwell questions
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Something went through my bath. Can it be fixed?
Normally. Send us a picture of the hole and one from under the bath if you can.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you redo someone else’s repair?
Typically, yes. We remove the old repair before doing a new one, so let us know about it.
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.
Nearby places to Milkwell
More services for Milkwell
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- Whether we combine several jobs
- How hard the colour is to match
- The type of damage
- Previous DIY repairs that have to come out
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- A clear, close picture of the problem area
- Where you are, by postcode
- A picture taken from further back
- Whether it’s been repaired or coated before
Send us a photo of the damage and a wider shot of the whole item, with your SP7 postcode, and we’ll reply with a fixed price.
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes two to three hours for most chips. If anything looks different from your photos, we’ll talk to you before going ahead.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the next day, the bath is ready to use.
How to prepare
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
- Ensure the room can be ventilated
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Advice
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Keep metal cans and razors off the surface
- A dripping tap stains enamel, so fix it early
- Protect the bath with a towel when doing jobs nearby
- Stick to mild cleaners and a soft cloth
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
About Milkwell
Milkwell is about 11 miles north of Blandford Forum, in Dorset. From the centre of Milkwell to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Milkwell is one of 462 towns and villages in Dorset we cover.
Our repair technicians cover all of the SP7 postcode area and the streets around it. We also cover the places around Milkwell: Birdbush (1 mile south-west), Donhead St Mary (1 mile north-west), Donhead St Andrew (1 mile north), Lillies Green (1 mile west) and Ludwell (1 mile south-west). Within a short drive, we also cover Blandford Forum (11 miles south), Verwood (14 miles south-east), Gillingham (7 miles west), Shaftesbury (3 miles west), Peacemarsh (7 miles west) and Sturminster Newton (10 miles south-west).
Local landmarks in Milkwell
Locally, our jobs take us to homes close to Ludwell Community Primary School and Church of St Andrew. Milkwell’s nearest station is Tisbury station, roughly 3.7 miles north-east. Other landmarks nearby include Westminster Memorial Hospital (3.6 miles west) and Gold Hill Museum (3.4 miles west). Green spaces nearby include White Sheet Hill.
About our accreditations · Every repair comes with a one-year guarantee.
