East Sussex · England
Bath chip & crack repair in Lullington, East Sussex
Chip and crack repairs to enamel, acrylic and cast iron baths in Lullington, carried out at your home and guaranteed for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- Rust by the waste and overflow
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Keep metal cans and razors off the surface
- Stick to mild cleaners and a soft cloth
- Get a dripping tap fixed promptly
- Put a towel in the bath if you are working above it
A repaired bath needs no special treatment. Skip bleach and gritty creams.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Bath repair in Lullington without replacing anything
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, generally in a single visit. We regularly repair acrylic, whirlpool & spa baths and pressed steel enamel, and common reasons people contact us are cracks in an acrylic bath and holes from dropped items.
Every repair comes with our one-year guarantee, wherever you are in East Sussex.
- Location
- Lullington (BN26)
- County
- East Sussex
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Also near Lullington
Also in Lullington
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
About Lullington
Lullington is about 3 miles north-east of Seaford, in East Sussex. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 289 places in East Sussex, from the larger towns to small villages. Our nearest city page is London, about 49 miles away.
Our visits in BN26 are booked in the same way as anywhere else. If you are just outside Lullington, we cover Dukes Green (1 mile south-west), Alfriston (1 mile north-west), Winton (1 mile north), Milton Street (1 mile north-east) and Wilmington (2 miles north-east). Larger places within reach include Eastbourne (6 miles east), Bexhill-on-Sea (14 miles east), Seaford (3 miles south-west), Lewes (9 miles north-west), Hailsham (6 miles north-east) and Uckfield (12 miles north).
Near you in Lullington
In Lullington, that means homes near Dean's Place Hotel, Church of St. Andrew and Alfriston School and the streets around them. For rail, the closest station is Berwick (Sussex) station, roughly 2.6 miles north. Nearby you will also find Old Forge Museum (Alfriston) (0.5 miles north-west) and Arlington Castle (0.9 miles north). The countryside around Lullington includes Combe Hill.
Landlord and trade work in Lullington
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Questions from Lullington
Can you repair something that is been repaired before?
Usually, yes. We remove the old repair before doing a new one.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Do you cover Lullington?
Yes, we do. Technicians travel to Lullington from across the region, with no extra charge for travel.
What happens next?
We review the pictures and send a fixed quote with dates.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes two to three hours for most chips. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
Advice
Honest limits
Some jobs are not right for a repair, for example:
- A steel bath rusted through
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we can’t get to from below
Send us pictures and we will tell you honestly before booking.
What we work on
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
How we price bath repair
Prices start from £95. We charge the same across the UK, including Lullington. What changes the price is:
- Previous DIY repairs that have to come out
- Access to the area
- How much damage there is
- How many items we do on one visit
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
You can take the pictures on your phone, there’s no need for anything special. Make sure they show:
- What it’s made of, if you know
- Details of any past repairs
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
Upload pictures of the damage and one of the entire item, and tell us you’re in Lullington, and we will come back with a fixed quote.
Repair or replace: which is better?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- No extra charge for your area
- Colours mixed by hand to suit your surface
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
Read our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
