Bradford · England
Bath chip & crack repair in Lumb Foot, Bradford
We travel to Lumb Foot for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Rust spots around the plughole
- A chipped rim or side

Looking after it afterwards
So the finish stays in good condition:
- Protect the bath with a towel when doing jobs nearby
- Keep abrasive pads and gritty cleaners away from the bath
- Ensure an acrylic bath is firm underfoot
- Rinse it down after each bath
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Bath repair at your home in Lumb Foot
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We work on roll-top & freestanding, acrylic and whirlpool & spa baths, and people most often call us about a kit repair that didn’t last and damage beneath the taps.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Lumb Foot (BD22)
- County
- Bradford
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026

Honest limits
A repair is not always the answer, and we’ll tell you before we start. Repairs won’t solve:
- Wear across the whole surface, which needs re-enamelling
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
If in doubt, send photos and we will say what we think.
Materials we work on in Lumb Foot
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Signs you need bath repair in Lumb Foot
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
Signs it’s time to call us include:
- Chips caused by builders
- Deep scratches in acrylic
- A failed DIY repair that is discoloured or lifting
- Rust spots around the plughole
Before booking anyone
- How long it needs to cure
- What happens if they find more damage
- Whether the price is fixed and includes VAT
- Whether the colour is mixed to match
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Why repair rather than replace?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- CHAS and Constructionline accredited
- Nothing taken out or refitted
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
Take a look at our pricing and resurfacing vs replacement cost guide.
Our work in Lumb Foot
Lumb Foot is about 3 miles south-west of Keighley, in Bradford. Our technicians come to homes and businesses in Lumb Foot and the surrounding area, so there’s no workshop to go to. Lumb Foot is one of 140 towns and villages in Bradford we cover. Our jobs stretch from Lumb Foot to Leeds (about 18 miles away).
Postcode districts we cover here: BD22. Nearby, we also work in Stanbury (1 mile south-west), Scholes (1 mile north), Oldfield (1 mile north-west), Marsh (1 mile south-east) and Haworth (1 mile east). We also work in nearby towns such as Bradford (9 miles east), Keighley (3 miles north-east), Bingley (6 miles east), Shipley (8 miles east), Baildon (9 miles east) and Great Horton (9 miles south-east).
Around Lumb Foot
Locally, our jobs take us to homes close to Wuthering Heights pub, St Gabriel's Church and Stanbury Village School and the streets around them. For rail, the closest station is Keighley station, about 4 miles north-east. A little further out are Haworth (1.4 miles east) and Airedale General Hospital (4.6 miles north). For a walk, there’s Redcar Tarn.
Landlords, agents and businesses in Lumb Foot
If you manage property in Lumb Foot, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
We carry out planned and one-off repairs for housing associations and facilities teams in Bradford and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Common questions in Lumb Foot
Can I get a quote without a visit?
Nearly always. If pictures do not show enough, we will ask for another angle.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you’ll get one combined price.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Do you work in Lumb Foot?
Yes. We work across the UK and travel to Lumb Foot and the rest of Bradford. Send photos and we’ll quote, or call 0345 017 0787.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Also in Lumb Foot
What affects the price in Lumb Foot
Repairs from £95. There is no charge for travel to Lumb Foot. The price comes down to:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- Doing more than one item at once
- The size and number of damaged areas
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Send pictures for a quote
Two or three clear photos are usually enough. Try to include:
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- One picture of the whole bath
- Details of any past repairs
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
How it works
Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes a few hours. We leave the room clean and you will know when it can be used.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Let us know if it has been repaired before
- Point us to the nearest place to park
- Tell us about parking, stairs or access
Getting a price
Most clients in Lumb Foot get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
About our accreditations · Every repair comes with a one-year guarantee.

