Lancashire · England

Bath chip & crack repair in Lumb, Lancashire

Local bath repair for Lumb: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • A cracked acrylic bath
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Lumb?

Bath repair in Lumb, done in place

You don’t need a new bath because of a chip. Our technicians fill, shape and refinish the damage, with the colour mixed on site. Typical jobs include scratches you can feel with a fingernail and chips along the edge of the bath, across pressed steel enamel, acrylic and cast iron enamel.

We stand behind the work with a one-year guarantee.

Before and after: a chipped, rust-stained bath around the plughole
Where
Lumb (BB4)
County
Lancashire
Guarantee
12 months on all our work
Quote
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Lumb: your questions answered

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

How do I get a price for bath repair in Lumb?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.

Do I need to be at home?

We need someone to let us in. You do not need to watch us work.

Is a bath repair permanent?

A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.

How quickly can you book me in?

We’ll give you dates with your quote. Tell us if you need it done quickly.

I tried a repair kit. Can you fix it?

Yes. We take out the old repair and do it properly. Mention it when you send pictures.

Can you repair a hole in a bath?

Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Fix dripping taps early to stop staining and limescale
  • Don’t scrub with anything abrasive
  • Get any new chip repaired before it rusts
  • Protect the bath with a towel when doing jobs nearby

For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.

Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

What we do, step by step

We agree an arrival time beforehand. On site, it takes a few hours. We leave the room clean and ready to use once it has cured.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Tell us about parking, stairs or access
  • Keep children and pets away from the room on the day
  • Clear toiletries, mats and anything else from around the area

How to get a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.

Get a free quote

Related advice

When a repair is not the answer

A repair is not right for every job, including:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Flexing caused by a failed cradle or loose feet

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths

When to call us in Lumb

A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

Clients usually contact us about:

  • Damage beneath the taps
  • An old repair that has yellowed or come loose
  • Cracks in an acrylic bath
  • A hole punched through by something heavy

Comparing quotes

  • A fixed quote, and whether VAT is included
  • How changes to the job are handled
  • How the room is protected while they work
  • The length of the guarantee and what it covers

How to compare quotes

Lumb and the surrounding area

Lumb is about 2 miles north-east of Rawtenstall, in Lancashire. Our repair technicians come to homes and businesses in Lumb, so nothing has to leave your home. Lumb is one of 482 towns and villages in Lancashire we cover. You can also see our page for Manchester, about 17 miles away.

Jobs in BB4 work the same way as everywhere else we cover. Local streets include Burnley Road East, Pinch Clough Road and Peers Clough Road, and we cover them all. We also travel to Water (1 mile north-east), Crawshawbooth (2 miles west), Goodshaw (2 miles west), Broadclough (2 miles east) and Rawtenstall (2 miles south-west). We also work in nearby towns such as Burnley (5 miles north), Accrington (5 miles north-west), Nelson (8 miles north), Colne (10 miles north), Clitheroe (12 miles north-west) and Haslingden (4 miles south-west).

Around Lumb

Our customers here include homes close to St Michael on the Hill, Water Primary School and Alder Grange School, among other places. The closest station to Lumb is Burnley Manchester Road station, roughly 4.4 miles north of the centre. Further afield, we also cover the area around Bacup Natural History Society And Museum (2.3 miles south-east) and Rossendale General Hospital (3 miles south-west). The countryside around Lumb includes Hameldon Hill.

Map of Lumb © OpenStreetMap contributors

Different materials, different repairs

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.

For landlords and businesses

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Repair or replace in Lumb?

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why book with us

  • Free fixed quotes from pictures
  • Same prices wherever you are
  • A year’s guarantee on all work
  • Honest advice, even when it means no job

Read our prices page or bath cost comparison.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.