Lancashire · England
Bath Repair in Water
Our repair technicians come to Water for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips along the edge of the bath
- Hairline or through cracks in acrylic
Work for landlords and builders
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We work for landlords, letting agents and housing providers in Water as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
How we handle bath repair in Water
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, generally in a single visit. We’re frequently asked to fix cracks in an acrylic bath and chips under the taps, in cast iron enamel, acrylic and whirlpool & spa baths.
Every job is backed for twelve months in Water and everywhere else. If something goes wrong with the work, we come back.
- Area
- Water (BB4)
- Area hub
- Lancashire
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Water
Other services in Water
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
When a repair isn’t the answer
A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send photos and we will say what we think.
What we work on
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Common questions in Water
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we will quote them together.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
When can I have a bath again?
Usually the day after. We’ll tell you the exact curing time when we finish.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you redo someone else’s repair?
Typically, yes. The old repair comes out first, so let us know about it.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Water. What changes the price is:
- The colour and finish to match
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
We charge the same wherever you are, with no extra for Water. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed price
Two or three clear photos are typically enough. It helps if you send:
- Where you are, by postcode
- The material, if you know it
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
What happens on the day
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes two to three hours for most chips. We clean up when we’re done and tell you when it’s ready to use.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
- Make sure the area is dry
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Read more
Water and nearby
Water is about 2 miles north-east of Rawtenstall, in Lancashire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. We work in 482 places across Lancashire, from the larger towns to small villages. You can also see our page for Manchester, about 17 miles away.
Our technicians cover all of BB4 and the streets around it. That includes homes on Burnley Road East, Ashworth Street and New Garden Fields. With the B6238 close by, Water is simple for us to get to. Close by, we cover Lumb (1 mile south-west), Crawshawbooth (2 miles west), Goodshaw (2 miles west), Broadclough (2 miles south-east) and Loveclough (2 miles north-west). Larger places within reach include Burnley (5 miles north), Accrington (5 miles west), Nelson (8 miles north), Colne (10 miles north), Clitheroe (12 miles north-west) and Haslingden (4 miles south-west).
Near you in Water
We visit homes around St Michael on the Hill, Water Primary School and Alder Grange School. Water’s nearest station is Burnley Manchester Road station, roughly 4.2 miles north. Further afield, we also cover the area around Rossendale General Hospital (3.3 miles south-west) and Bacup Natural History Society And Museum (2.3 miles south-east). For a walk, there is Rowley Lake and Hameldon Hill.
How to care for the repair
Most damage we see is avoidable. These habits help:
- Keep metal cans and razors off the surface
- Use a soft cloth and washing-up liquid for everyday cleaning
- Rinse it down after each bath
- Fix dripping taps early to stop staining and limescale
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Repair or replace in Water?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- No extra charge for your area
- A fixed quote before you book
- Colours mixed by hand to suit your surface
- Dust sheets down, tidy finish
Take a look at our full price list and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
