North Yorkshire · England
Bath Repair in Malton
Our technicians come to Malton for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Hairline or through cracks in acrylic
- A chipped rim or side
About our bath repair in Malton
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. If you are dealing with cracks in an acrylic bath and rust spots around the plughole, we can help.
You get a one-year guarantee, the same in Malton as everywhere else we work.
- Location
- Malton (YO17)
- County
- North Yorkshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Malton
Malton is about 17 miles north-east of York, in North Yorkshire. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Malton is one of 626 places in North Yorkshire where we work. Our jobs stretch from Malton to Leeds (about 38 miles away).
Our repair technicians cover all of the YO17 postcode area. That includes homes on Market Place, Ryder Square and Wentworth Street. With the B1248 and B1257 close by, Malton is easy for our technicians to reach. We also travel to Old Malton (1 mile north-east), Norton-on-Derwent (1 mile south-east), Sutton (1 mile south-east), Scagglethorpe (3 miles east) and Settrington (3 miles east). Larger places within reach include Pickering (7 miles north), Kirkbymoorside (11 miles north-west), Helmsley (13 miles north-west), Thornton-le-Dale (7 miles north-east), Rillington (4 miles east) and East Ayton (15 miles north-east).
What’s near Malton
Our clients here include homes close to Malton Community Primary School, Malton School and The Blue Ball Public House And Attached Outbuildings At Rear and the streets around them. There’s a railway station in Malton itself: Malton station. Well-known places in the area include Malton Community Hospital (under half a mile west) and The Counting House Museum (less than half a mile south).
What else we do in Malton
How we price bath repair
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- What the surface is made of
- The size and number of damaged areas
- The colour and finish to match
- Whether we combine several jobs
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Most quotes are done from pictures alone. To help us price it:
- Natural light rather than flash
- Details of any past repairs
- The postcode, so we can plan the visit
- A wider photo showing the whole bath
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
FAQs for Malton
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Are there extra charges for Malton?
Travel is included in the price, and we charge the same wherever you are.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Can you quote from photos?
Normally, yes. Clear photos let us give you a fixed quote without visiting.
Do you cover Malton?
Yes. We cover the entire UK and come to Malton and the rest of North Yorkshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Landlords, agents and businesses in Malton
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Repair or replace in Malton?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. We charge the same wherever you are, with no extra for Malton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- One visit for most repairs
- A fixed quote before booking
- Technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page or bath cost comparison.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
What happens on the day
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. You can expect it to take a few hours, and we will tell you if anything changes.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the day after.
Getting ready for the visit
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Store metal items away from the bath
- Rinse the bath after use, especially in hard water areas
- Cover the bath during DIY or decorating
- Fix dripping taps early to stop staining and limescale
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Common problems we fix in Malton
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
It’s worth getting a quote if you see:
- A failed DIY repair that is discoloured or lifting
- Damage beneath the taps
- Chips along the edge of the bath
- Scratches you can feel with a fingernail
Before booking anyone
- What aftercare is recommended
- Whether there are any call-out or travel charges
- What happens if they find more damage
- How soon you can use it again
About our accreditations · Every repair comes with a one-year guarantee.
