North Yorkshire · England
Bath Repair for Old Malton homes
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Old Malton. Send photos for a free, fixed quote.
- Repairs from £95
- Cracks in an acrylic bath
- Rust spots around the plughole
About our bath repair in Old Malton
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. We’re frequently asked to fix snagging damage from a refit and scuffs and scratches in the surface, in acrylic, roll-top & freestanding and pressed steel enamel.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Old Malton (YO17)
- Area hub
- North Yorkshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
We will always be straight with you, so here’s what a repair won’t do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Old Malton
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Where we work around Old Malton
Old Malton is about 1 mile north-east of Malton, in North Yorkshire. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. Our technicians cover 626 places across North Yorkshire. Our jobs stretch from Old Malton to Leeds (about 39 miles away).
Our repair technicians cover all of the YO17 postcode area. That includes homes on Westgate Lane, Lascelles Lane and Hawthorn Avenue and the roads around them. Other places close to Old Malton include Malton (1 mile south-west), Norton-on-Derwent (1 mile south), Sutton (2 miles south), Scagglethorpe (2 miles east) and Settrington (3 miles south-east). Within a short drive, we also cover Pickering (7 miles north), Kirkbymoorside (11 miles north-west), Helmsley (13 miles north-west), Thornton-le-Dale (7 miles north), Seamer (15 miles north-east) and Rillington (4 miles east).
What’s near Old Malton
Around Old Malton, we work in homes near Priory Church of St Mary, Malton School and The Royal Oak Public House, among other places. The nearest railway station is Malton station, roughly 1.2 miles south-west. Other landmarks nearby include Malton Castle (0.9 miles south-west) and The Counting House Museum (1.1 miles south-west).
Common problems we fix in Old Malton
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Typical reasons for a call-out include:
- A kit repair that didn’t last
- A chipped rim or side
- A chip where the taps sit
- A hole punched through by something heavy
Questions to ask before booking
- Who turns up on the day
- How to care for the finish
- What prep work is covered
- The length of the guarantee and what it covers
Repairs by material
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Aftercare tips
How the surface is treated afterwards matters:
- Rinse it down after each bath
- Keep metal cans and razors off the surface
- Get a dripping tap fixed promptly
- Use a soft cloth and washing-up liquid for everyday cleaning
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Repairing versus replacing in Old Malton
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in Old Malton
- We come to you, anywhere in the UK
- A year’s guarantee on all work
- Everything repaired in place
- We’ll tell you if it’s not worth repairing
Read our prices page or resurfacing vs replacement cost guide.
FAQs for Old Malton
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can a cracked acrylic bath be fixed?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
What happens next?
We review the pictures and send a fixed quote.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
What we do, step by step
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, and the room is left clean and tidy.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Ensure the room can be ventilated
- Tell us if there are stairs or a lift
- Let us know about parking or access
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Read more
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Also near Old Malton
What else we do in Old Malton
About our accreditations · Every repair comes with a one-year guarantee.
