Shropshire · England
Bath chip & crack repair in Mamble, Shropshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Mamble. Send photos for a free, fixed quote.
- Repairs from £95
- Rust spots around the plughole
- Damage beneath the taps
Mamble and nearby
Mamble is about 7 miles west of Stourport-on-Severn, in Shropshire. Whether you’re in the middle of Mamble or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Mamble is one of 433 places in Shropshire where we work. You can also see our page for Birmingham, about 26 miles away.
Postcode districts we cover here: DY14. If you are just outside Mamble, we cover Bayton (1 mile north-east), Bayton Common (2 miles north-east), Clows Top (2 miles east), Menithwood (2 miles south-east) and Eardiston (2 miles south). Further out, we also cover Bridgnorth (14 miles north), Ludlow (11 miles west), Cleobury Mortimer (3 miles north), Highley (8 miles north), Alveley (9 miles north-east) and East Hamlet (11 miles west).
What’s near Mamble
Typical jobs here are in homes near Church of St John the Baptist, Bayton CofE Primary School and The Sun And Slipper Public House. Other landmarks nearby include Eastham Bridge mound (2.3 miles south-west). The countryside around Mamble includes Hunthouse Wood.
Bath repair at your home in Mamble
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Typical jobs include chips on the rim or sides and holes from dropped items, across roll-top & freestanding, cast iron enamel and acrylic.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Area
- Mamble (DY14)
- Region
- Shropshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Get a dripping tap fixed promptly
- Don’t leave razors or cans standing in the bath
- Protect the bath with a towel when doing jobs nearby
- Have new chips seen to early
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a few hours. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Make sure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
FAQs for Mamble
Do you come to Mamble?
We do. Technicians travel to Mamble from across the region, with no extra charge for travel.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Is a repair better than a new one?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Can you repair something that is been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Signs you need bath repair in Mamble
Rust normally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
These are the problems we’re asked about most:
- An old repair that has yellowed or come loose
- A hole punched through by something heavy
- Rusty patches near the plughole
- Hairline or through cracks in acrylic
Before you book anyone
- When it can be used again
- Whether the colour is mixed to match
- What preparation is included
- Is the price fixed, and does it include VAT?
Nearby places to Mamble
More services for Mamble
What bath repair costs
Prices start from £95. Every quote is fixed and free. What we look at:
- Access to the area
- The size and number of damaged areas
- Whether we combine several jobs
- The type of damage
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
We price nearly every job from pictures. This is what to send:
- What it’s made of, if you know
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- Details of any past repairs
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
What we cannot put right
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Acrylic cracks with no access behind them
- A steel bath rusted through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. Our prices are the same across the UK, so there’s no premium for Mamble. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Mamble customers choose us
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
- We will tell you if it’s not worth repairing
- Fixed prices from your photos
Take a look at our prices page and bath cost comparison.
For landlords and businesses
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
