Worcestershire · England
Bath Repair for Eardiston homes
Problem with your bath in Eardiston? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A chipped rim or side
- Rusty patches near the plughole
Bath repair at your home in Eardiston
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. Common call-outs are for a failed DIY repair that’s discoloured or lifting and chips under the taps, in whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
We stand behind the work with a one-year guarantee.
- Location
- Eardiston (WR15)
- Area hub
- Worcestershire
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
Also near Eardiston
What else we do in Eardiston
FAQs for Eardiston
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Something went through my bath. Can it be fixed?
Often, if there is access underneath. We back the hole, fill it and refinish the surface.
Do you come to Eardiston?
Yes. We work across the UK and come to Eardiston. Send photos and we will quote, or call 0345 017 0787.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Landlord and trade work in Eardiston
Housing associations and facilities teams use us for planned and reactive repairs in Worcestershire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For anyone letting property in or around Eardiston, we will quote for several properties at once. Send photos for each one and we will come back with a combined price.
Eardiston and the surrounding area
Eardiston is about 7 miles west of Stourport-on-Severn, in Worcestershire. Jobs in Eardiston are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. We cover all 376 towns and villages in Worcestershire. Our jobs stretch from Eardiston to Birmingham (about 26 miles away).
All of WR15 is within our area. We regularly work on streets such as Mill Lane, Cutmill Bridge and Pensmill Close and the roads around them. We also travel to Menithwood (1 mile north-east), Stockton on Teme (2 miles east), Pensax (2 miles east), Mamble (2 miles north) and Elms Green (2 miles east). Larger places within reach include Worcester (13 miles south-east), Kidderminster (10 miles north-east), Great Malvern (14 miles south), Droitwich Spa (13 miles east), Stourport-on-Severn (7 miles east) and Bewdley (7 miles north-east).
Around Eardiston
Other landmarks nearby include Eastham Bridge mound (2.2 miles west). For a walk, there’s Hunthouse Wood and Abberley Hill.
What bath repair costs
Repairs from £95. There’s no area surcharge for Eardiston. What changes the price is:
- Where the damage is and how we get to it
- The type of damage
- Any earlier repairs that need removing first
- How many items we do on one visit
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- A coin or ruler next to the damage for scale
- The material, if you know it
- A wider photo showing the entire bath
- Details of any past repairs
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
When to call us in Eardiston
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
Get in touch if you’ve noticed:
- Chips along the edge of the bath
- Snagging damage from a refit
- A hole punched through by something heavy
- Chips under the taps
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- Whether they match the colour on site
- If travel is included in the price
- What aftercare is recommended
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes two to three hours for most chips. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. There’s no charge for the quote and no obligation.
Read more
What we can’t put right
Some jobs are not right for a repair, for example:
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
- Wear across the entire surface, which needs re-enamelling
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Eardiston
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Stick to mild cleaners and a soft cloth
- Don’t leave razors or cans standing in the bath
- Avoid scourers, wire wool and gritty cream cleaners
- If an acrylic bath flexes, have its feet adjusted
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
About our accreditations · Every repair comes with a one-year guarantee.
