East Riding of Yorkshire · England
Bath chip & crack repair in Marton, East Riding of Yorkshire
Our technicians come to Marton for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips along the edge of the bath
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Bath repair at your home in Marton
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you’re dealing with chips along the edge of the bath and a kit repair that didn’t last, we can usually put it right, on pressed steel enamel, cast iron enamel and whirlpool & spa baths alike.
A one-year guarantee comes as standard.
- Where
- Marton (YO16, YO15)
- County
- East Riding of Yorkshire
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath repair in Marton?
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
You may need us if you’ve spotted:
- An old repair that has yellowed or come loose
- Snagging damage from a refit
- Damage beneath the taps
- A hole punched through by something heavy
What to look for in a quote
- The length of the guarantee and what it covers
- When it can be used again
- What happens if the damage is worse than the pictures show
- Whether the price is fixed and includes VAT
Repair or replace: which is better?
Swapping a damaged bath for a new one typically means a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in one visit. Prices start from £95. The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.
Why Marton clients choose us
- Accredited with CHAS, Constructionline and SafeContractor
- Colours mixed by hand to suit your surface
- One visit for most repairs
- Same prices wherever you are
Read our prices page or bath cost comparison.
Honest limits
A repair isn’t always the answer, and we’ll tell you before we start. Repairs will not solve:
- Cracks in acrylic we cannot reach from underneath
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
Send us photos and we will tell you honestly.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Marton: your questions answered
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across East Riding of Yorkshire.
What happens after I send photos?
You will get a fixed quote back. There’s no obligation to book.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Which areas do you work in?
All of East Riding of Yorkshire, and the rest of the UK. Travel is included in the price.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Do you come to Marton?
Yes. We work across the UK and travel to Marton and the rest of East Riding of Yorkshire. Send pictures and we’ll quote, or call 0345 017 0787.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Ensure an acrylic bath is firm underfoot
- Put a towel in the bath if you are working above it
- Fix dripping taps early to stop staining and limescale
- Rinse the bath after use, especially in hard water areas
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Marton and nearby
Marton is about 2 miles north-east of Bridlington, in East Riding of Yorkshire. We visit homes and businesses in Marton and nearby villages, so there’s no workshop to go to. Marton is one of 299 towns and villages in East Riding of Yorkshire we cover. We work right across the region, from Marton to Leeds (about 60 miles away).
We cover every part of the YO16 and YO15 postcode area. From Church Lane, Jewison Lane and Mordacks Road or a nearby road, we can come to you. If you’re just outside Marton, we cover Sewerby (1 mile south), Bempton (2 miles north), Flamborough (2 miles east), Bridlington (2 miles south-west) and Buckton (2 miles north-west). Within a short drive, we also cover Driffield (13 miles south-west), Hornsea (14 miles south), Nafferton (11 miles south-west), Hutton Cranswick (15 miles south-west), Brandesburton (15 miles south) and Beeford (11 miles south-west).
Around Marton
Locally, our jobs take us to homes close to The Ship Public House, Church of St John the Evangelist and Martongate Primary School, among other places. Marton’s nearest station is Bempton station, roughly 1.4 miles north-west. Other landmarks nearby include National Coastguard Museum (0.5 miles south) and Flamborough Castle (1.6 miles east). Open spaces near Marton include Bempton Cliffs RSPB reserve.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
What we do, step by step
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a few hours, depending on the damage, and we finish by cleaning up and talking you through the result.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Read more
Also near Marton
Other services in Marton
Elsewhere in East Riding of Yorkshire
Bath Repair across all 299 places in East Riding of Yorkshire
Our services in East Riding of Yorkshire
All UK areas
All about bath chip & crack repair
What bath repair costs
Repairs from £95. There is no charge for travel to Marton. The price depends on:
- How much damage there is
- How easy the damage is to reach
- The colour and finish to match
- The material
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Send photos for a quote
Two or three clear pictures are usually enough. It helps if you send:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- A wider photo showing the whole bath
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
