East Riding of Yorkshire · England

Bath re-enamelling & resurfacing in Marton, East Riding of Yorkshire

Full bath re-enamelling and resurfacing for homes and businesses in Marton and across East Riding of Yorkshire. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Enamel that’s lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Marton

How we handle bath re-enamelling in Marton

A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Our technicians work on Victorian roll-tops, acrylic baths and basins & shower trays, and common reasons people get in touch are stains that won’t shift and a dull, rough surface that won’t come clean.

Big or small, it’s backed by a one-year guarantee.

Area
Marton (YO16, YO15)
Area hub
East Riding of Yorkshire
Cover
A year, on every repair
Quotes
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

How the visit works

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow most of the day. Before leaving, we tell you how long to leave it and how to care for it.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Getting ready for the visit

  • Tell us if there are stairs or a lift
  • Keep children and pets away from the room on the day
  • Tell us about any previous repairs or coatings

How to get a price

To get a price, send two or three photos through our quote form or call us. We will say immediately if a repair is the right fix.

Get a free quote

Read more

For landlords and businesses

For anyone letting property in or around Marton, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.

Common problems we fix in Marton

Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.

These are the problems we’re asked about most:

  • A bath that stays dull however much you clean it
  • Several chips and rust patches
  • An outdated colour you’d like to change
  • Stains that won’t shift

Before you book anyone

  • Whether there are any call-out or travel charges
  • How long the guarantee is and what it covers
  • How soon you can use it again
  • How your room will be protected

10 questions to ask before you book

Repair or replace in Marton?

There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. Otherwise, resurfacing usually wins. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

What you get with us

  • Every repair guaranteed for a year
  • Repair technicians who travel to you, UK-wide
  • Colour-matched on site
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our prices page or resurfacing vs replacement cost guide.

Marton questions

How much does bath re-enamelling cost in Marton?

Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo with your YO16 postcode.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Will the price change on the day?

The price is fixed for what the photos show. If there’s more, we will tell you before starting.

How quickly can you book me in?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Will there be fumes?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.

What a repair can’t fix

To be straight with you, there are a few things a repair won’t fix:

  • Problems we cannot see until an old finish comes off
  • Leaking taps or wastes (a plumber’s job)
  • Acrylic that moves when you stand in it

Send us photos and we’ll tell you honestly.

Materials we work on in Marton

  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths

Our work in Marton

Marton is about 2 miles north-east of Bridlington, in East Riding of Yorkshire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Our technicians cover 299 places across East Riding of Yorkshire. Our jobs stretch from Marton to Leeds (about 60 miles away).

We cover every part of the YO16 and YO15 postcode area and the streets around it. You will find streets such as Church Lane, Jewison Lane and Mordacks Road. If you’re just outside Marton, we cover Sewerby (1 mile south), Bempton (2 miles north), Flamborough (2 miles east), Bridlington (2 miles south-west) and Buckton (2 miles north-west). We also work in nearby towns such as Driffield (13 miles south-west), Hornsea (14 miles south), Nafferton (11 miles south-west), Hutton Cranswick (15 miles south-west), Brandesburton (15 miles south) and Beeford (11 miles south-west).

Around Marton

Our customers here include homes close to The Ship Public House, Church of St John the Evangelist and Martongate Primary School and the streets around them. For rail, the closest station is Bempton station, about 1.4 miles north-west. A little further out are National Coastguard Museum (0.5 miles south) and Flamborough Castle (1.6 miles east). Open spaces near Marton include Bempton Cliffs RSPB reserve.

Map of Marton © OpenStreetMap contributors

How to care for the repair

It’s all simple stuff:

  • Stick to gentle, non-abrasive cleaners
  • Get any chip repaired quickly
  • Dry the bath after use to stop limescale
  • Fix dripping taps quickly

Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.

If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

Prices and what affects them

Prices start from £350. A fixed quote means you know the cost before you book. We look at:

  • How many items we do on one visit
  • Whether it’s a chip, crack, burn or wear
  • Whether old repairs or coatings need taking off
  • The material and finish

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

How to get a fixed price

You can take the pictures on your phone, there is no need for anything special. Make sure they show:

  • Good light, ideally daylight, without flash glare
  • Any earlier repairs or coatings
  • Any details about the material
  • A close-up of the damage, in focus

For a price in Marton, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.