Angus · Scotland
Bath Repair for Maryton homes
Bath repair in and around Maryton: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Impact holes in acrylic
- Damage done while the bathroom was being fitted
About our bath repair in Maryton
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Our technicians work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and people most frequently call us about a failed DIY repair that’s discoloured or lifting and impact holes in acrylic.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Location
- Maryton (DD8)
- Region
- Angus
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Our prices are the same across the UK, with no extra for Maryton. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Maryton customers choose us
- Free fixed quotes from pictures
- Rooms protected and left tidy
- CHAS and Constructionline accredited
- Most jobs done in one visit
Read our prices page or resurfacing vs replacement cost guide.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Put a towel in the bath if you are working above it
- Do not scrub with anything abrasive
- Rinse it down after each bath
- Keep metal cans and razors off the surface
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a few hours, depending on the damage. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the following day.
Preparing for the visit
- Open a window if you can
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Read more
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs in Angus and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What bath repair costs
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- The material
- Doing more than one item at once
- Any earlier repairs that need removing first
- How many areas need work
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
You can take the pictures on your phone. Just ensure we can see:
- Any details about the material
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- A wider photo showing the whole bath
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
When to call us in Maryton
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Send us a picture if you notice any of these:
- Damage beneath the taps
- A chipped rim or side
- Scratches you can feel with a fingernail
- A failed DIY repair that is discoloured or lifting
Comparing quotes
- Whether a trained technician does the job
- Whether the price covers travel
- How the colour is matched
- Aftercare advice
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Questions from Maryton
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
How do I book?
Use the quote form or ring 0345 017 0787.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Can you repair a hole in a bath?
Usually. Send us a photo of the hole and one from under the bath if you can.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Do you cover Maryton?
We do. Repair technicians travel to Maryton from across the region, and the price is the same as everywhere else.
Where we work around Maryton
Maryton is about 4 miles west of Forfar, in Angus. Across the DD8 area, we carry out the work at your property. We work in 40 places in Angus. Our nearest city page is Edinburgh, about 51 miles away.
Postcode districts we cover here: DD8. We regularly work on streets such as Mid Row, Forfar Road and Third Row. Other places close to Maryton include Kirriemuir (1 mile north-west), Westmuir (2 miles west), Padanaram (2 miles south-east), Douglastown (4 miles south-east) and Glamis (4 miles south). Further out, we also cover Carnoustie (15 miles south-east), Brechin (13 miles east), Hunter's Town (15 miles south-east), Gardynebourg (15 miles south-east), Letham (9 miles east) and Friockheim (13 miles east).
Local landmarks in Maryton
Locally, our jobs take us to homes close to St Andrew's Church and Roods Bar. Other landmarks nearby include Kirriemuir Gateway to the Glens Museum (0.7 miles north-west) and Inverquharity Castle (3.1 miles north). Open spaces near Maryton include Loch of Kinnordy and Mile Hill.
Towns and villages near Maryton
What else we do in Maryton
About our accreditations · Every repair comes with a one-year guarantee.
