Derbyshire · England

Bath chip & crack repair in Mastin Moor, Derbyshire

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Mastin Moor, with a one-year guarantee on every repair.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Mastin Moor

Bath repair in Mastin Moor without replacing anything

A typical bath repair is a few hours’ work, and the bath is back in use the next day. You will not need a plumber or tiler, because the bath doesn’t move. Our technicians work on cast iron enamel, pressed steel enamel and roll-top & freestanding, and people most frequently call us about snagging damage from a refit and chips on the rim or sides.

You get a one-year guarantee, the same in Mastin Moor as everywhere else we work.

Rusty chip next to a bath plughole, before and after repair
Where
Mastin Moor (S43)
County
Derbyshire
Warranty
One year on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026

Signs you need bath repair in Mastin Moor

Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

It’s worth getting a quote if you see:

  • Damage done while the bathroom was being fitted
  • Scuffs and scratches in the surface
  • A cracked acrylic bath
  • Rust by the waste and overflow

Comparing quotes

  • Whether they match the colour on site
  • Whether the price covers travel
  • Who will actually do the work
  • A fixed quote, and whether VAT is included

Choosing a repair company

Repairing versus replacing in Mastin Moor

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Prices start from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

What you get with us

  • Nothing taken out or refitted
  • Same prices wherever you are
  • Most jobs done in one visit
  • A year’s guarantee on all work

See our pricing or guide to resurfacing and replacement costs.

Landlords, agents and businesses in Mastin Moor

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.

Questions from Mastin Moor

I’m a tenant. Can you help?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Will there be a smell?

There may be a mild smell during the work.

Is repairing better than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

Can you quote from photos?

In nearly every case. If photos do not show enough, we will ask for another angle.

Can you match an avocado or pink bath?

Yes. We mix the colour on the day to match, including pastel and older colours.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Which areas do you work in?

We work UK-wide. Our prices are the same everywhere.

It’s been repaired before. Can you still fix it?

In most cases. We remove the old repair before doing a new one.

What bath repair costs

Repairs from £95. There is no area surcharge for Mastin Moor. What changes the price is:

  • Any earlier repairs that need removing first
  • What the surface is made of
  • Where the damage is and how we get to it
  • The type of damage

We charge the same wherever you are, so there’s no premium for Mastin Moor. What changes the price is the job itself: the material, the amount of damage and how many items.

How to get a fixed price

A couple of clear pictures is all it takes. It helps if you send:

  • A coin beside the damage so we can judge size
  • Whether it’s been repaired or coated before
  • Daylight if possible, and no flash reflection
  • Where you are, by postcode

Most clients in Mastin Moor get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

How it works

The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the work takes a few hours, depending on the damage. At the end we talk you through how soon it can be used and how to care for it.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Ensure the area is dry
  • Have somewhere for us to park nearby if possible
  • Tell us about any previous repairs or coatings

Ask for a price

A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Get a free quote

Related advice

Keeping it looking good

It’s all simple stuff, just a few sensible habits:

  • A dripping tap stains enamel, so fix it early
  • Have new chips seen to early
  • Avoid scourers, wire wool and gritty cream cleaners
  • Use a soft cloth and washing-up liquid for everyday cleaning

Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.

Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

When we would advise against a repair

Honesty matters more than a booking, so here’s what a repair won’t do:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Acrylic cracks with no access behind them
  • Leaking fittings, which need a plumber

If in doubt, send photos and we will say what we think.

Surfaces we repair

  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths
  • Pressed steel enamel

Mastin Moor and nearby

Mastin Moor is about 2 miles north-east of Staveley, in Derbyshire. We travel to customers in Mastin Moor and nearby villages, so there is no workshop to go to. Mastin Moor is one of 532 towns and villages in Derbyshire where we work. Our nearest city page is Leeds, about 38 miles away.

We cover every part of the S43 postcode area and the streets around it. You’ll find streets such as Edale Road, Rowan Road and Worksop Road. Other places close to Mastin Moor include Woodthorpe (1 mile south), Beighton Fields (1 mile north), Netherthorpe (1 mile west), Poolsbrook (1 mile south-west) and Renishaw (2 miles north). Larger places within reach include Chesterfield (5 miles south-west), Dronfield (6 miles west), Bolsover (3 miles south-east), Matlock (13 miles south-west), Clay Cross (8 miles south-west) and South Normanton (12 miles south).

What’s near Mastin Moor

In Mastin Moor, that means homes near Church of St Peter, Netherthorpe School and The Albert Inn. Also close by are Poolsbrook Country Park (1.4 miles south-west) and Norbriggs Primary School (within half a mile south-west). The nearest railway station is Creswell station, roughly 4.5 miles east. Nearby you will also find Bolsover Hospital (3.5 miles south-east) and Bolsover Castle (3.2 miles south).

Map of Mastin Moor © OpenStreetMap contributors

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.