North Ayrshire · Scotland

Bath chip & crack repair in Meikle Auchengree, North Ayrshire

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Meikle Auchengree, with a one-year guarantee on every repair.

  • Repairs from £95
  • A cracked acrylic bath
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Meikle Auchengree

When to call us in Meikle Auchengree

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.

You may need us if you’ve spotted:

  • Damage beneath the taps
  • Deep scratches in acrylic
  • Damage done while the bathroom was being fitted
  • An old repair that has yellowed or come loose

Before booking anyone

  • Whether the colour is mixed to match
  • What the guarantee covers, and for how long
  • Aftercare advice
  • How the room is protected while they work

10 questions to ask before you book

Bath repair in Meikle Auchengree without replacing anything

A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. If you’re dealing with rust by the waste and overflow and a cracked acrylic bath, we can usually put it right.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Rusty chip next to a bath plughole, before and after repair
Location
Meikle Auchengree (KA14, KA24)
Region
North Ayrshire
Guarantee
12 months on all our work
Quote
From £95. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

Different materials, different repairs

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.

What we do, step by step

A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for a few hours from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Let the surface dry out before the visit
  • Clear toiletries, mats and anything else from around the area
  • Tell us about any previous repairs or coatings

Ask for a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.

Get a fixed price

Related advice

Meikle Auchengree and the surrounding area

Meikle Auchengree is about 6 miles north of Kilwinning, in North Ayrshire. Anywhere in KA14, we come to you. We cover 53 places in North Ayrshire, from the larger towns to small villages. We work right across the region, from Meikle Auchengree to Glasgow (17 miles away).

We cover every part of KA14 and KA24. Jobs here include addresses on Beith Road, Smith Avenue and Kersland Road and the roads around them. Neighbouring places we cover include Longbar (1 mile north-east), Glengarnock (1 mile north-west), Kilbirnie (1 mile north-west), Beith (2 miles north-east) and Gateside (3 miles east). We also work in nearby towns such as Irvine (8 miles south), Kilwinning (6 miles south), Saltcoats (8 miles south-west), Largs (9 miles north-west), Ardrossan (8 miles south-west) and Stevenston (7 miles south-west).

Near you in Meikle Auchengree

Typical jobs here are in homes near Orr's Trust Public Park, Geilsland House and Kilbirnie Auld Kirk and the streets around them. There is a railway station in Meikle Auchengree itself: Glengarnock station. Further afield, we also cover the area around The Lands of Roughwood (1.3 miles east). For a walk, there is Kilbirnie Loch.

Map of Meikle Auchengree © OpenStreetMap contributors

What bath repair costs

Repairs from £95. We charge the same across the UK, including Meikle Auchengree. The price reflects:

  • Where the damage is and how we get to it
  • Doing more than one item at once
  • How hard the colour is to match
  • The material

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

Send photos for a quote

Two or three clear pictures are generally enough. Try to include:

  • Any details about the material
  • Something in shot to show the size
  • Whether it’s been repaired or coated before
  • A photo taken from further back

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and you’re under no obligation.

Repair or replace: which is better?

Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

What you get with us

  • Dust sheets down, tidy finish
  • Every repair guaranteed for a year
  • We’ll tell you if it’s not worth repairing
  • One price list for the entire UK

Read our full price list and resurfacing vs replacement cost guide.

FAQs for Meikle Auchengree

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Is there a call-out fee?

We do not add a call-out fee. The fixed price covers the visit and the work.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Can you match an avocado or pink bath?

Yes. We mix the colour on the day to match, including older coloured suites.

I rent my home. Can I book you?

Of course. Ask your landlord first, and we can send them the quote if that helps.

When can I have a bath again?

Most baths can be used the following day. We confirm the time before we leave.

What if the damage is worse than the pictures show?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Landlord and trade work in Meikle Auchengree

If you manage property in Meikle Auchengree, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.

Landlords, letting agents and housing providers in Meikle Auchengree use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

Looking after it afterwards

Good habits make a big difference to how long a repair lasts:

  • Stick to mild cleaners and a soft cloth
  • Get any new chip repaired before it rusts
  • A dripping tap stains enamel, so fix it early
  • Rinse the bath after use, especially in hard water areas

Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

When we’d advise against a repair

To be straight with you, some problems need a different fix:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Acrylic cracks with no access behind them
  • Wear across the whole surface, which needs re-enamelling

Not sure? Send photos and we’ll give you a straight answer before booking.

What we work on

  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.