Kirklees · England
Bath chip & crack repair in Meltham Mills, Kirklees
Our technicians come to Meltham Mills for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Deep scratches in acrylic
- Hairline or through cracks in acrylic
Meltham Mills: your questions answered
Is a cracked acrylic bath repairable?
Generally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
How much does bath repair cost in Meltham Mills?
Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
What happens after I send photos?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
About our bath repair in Meltham Mills
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, typically in a single visit. We’re frequently asked to fix snagging damage from a refit and cracks in an acrylic bath, in pressed steel enamel, cast iron enamel and acrylic.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Meltham Mills (HD9)
- Area hub
- Kirklees
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
How the surface is treated afterwards matters:
- If an acrylic bath flexes, have its feet adjusted
- Get a dripping tap fixed promptly
- Avoid scourers, wire wool and gritty cream cleaners
- Use a soft cloth and washing-up liquid for everyday cleaning
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Take it off before we arrive.
Do you need bath repair in Meltham Mills?
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water collects there, so chips nearby rust quickly.
People normally call us after spotting one of these:
- Rusty patches near the plughole
- A hole punched through by something heavy
- An old repair that has yellowed or come loose
- A cracked acrylic bath
What to look for in a quote
- When it can be used again
- What happens if the damage is worse than the photos show
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why choose Surface Doctor in Meltham Mills
- Everything repaired in place
- Same prices wherever you are
- Colours mixed by hand to suit your surface
- One visit for most repairs
See our pricing or resurfacing vs replacement cost guide.
Landlord and trade work in Meltham Mills
We work for landlords, letting agents and housing providers in Meltham Mills as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
For anyone letting property in or around Meltham Mills, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
Prices and what affects them
Prices start from £95. We price every job individually. The main factors are:
- Any earlier repairs that need removing first
- The size and number of damaged areas
- Whether we combine several jobs
- Unusual colours or finishes
The price reflects the work involved, not where you live. You will see the full price before you book, with nothing added on the day.
Getting a price from photos
Photographing the damage takes a minute. Try to send:
- Where you are, by postcode
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Nearby places to Meltham Mills
More services for Meltham Mills
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What happens on the day
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. It generally takes a few hours, and you are welcome to carry on with your day while we work.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Point us to the nearest place to park
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
Ask for a price
Send us photos of the damage and a wider shot of the whole item, with your HD9 postcode, and we’ll reply with a fixed quote.
Read more
Meltham Mills and nearby
Meltham Mills is about 4 miles south-west of Huddersfield, in Kirklees. We visit homes and businesses in Meltham Mills, so nothing has to leave your home. We work in all 189 towns and villages across Kirklees, from the larger towns to small villages. Our jobs stretch from Meltham Mills to Manchester (about 18 miles away).
Every address in HD9 is covered, from the main roads to the quietest streets. From Acre Lane, Mean Lane and Near Lane or anywhere nearby, we can come to you. If you’re just outside Meltham Mills, we cover Meltham (1 mile west), Wilshaw (1 mile south-east), Upperthong (2 miles south-east), Flush House (2 miles south) and Burnlee (2 miles south-east). We also work in nearby towns such as Huddersfield (4 miles north-east), Dewsbury (11 miles north-east), Batley (12 miles north-east), Mirfield (8 miles north-east), Liversedge (10 miles north-east) and Cleckheaton (10 miles north-east).
What’s near Meltham Mills
Our customers here include homes close to Meltham CofE (VC) Primary School, The Swan pub and Colne Valley High School. The closest station to Meltham Mills is Honley station, roughly 2.6 miles east. Other landmarks nearby include David Brown Tractor Museum (under half a mile east) and St. Luke's Hospital (3.1 miles north-east). Green spaces nearby include Oldfield Hill.
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
