Gloucestershire · England
Bath Repair in Milbury Heath
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Milbury Heath, with a one-year guarantee on every repair.
- Repairs from £95
- Snagging damage from a refit
- A failed DIY repair that’s discoloured or lifting
FAQs for Milbury Heath
Is a holed acrylic bath repairable?
Typically. Photos of the hole and the underside help us check.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. Then we’ll agree a date.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
How we handle bath repair in Milbury Heath
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. You can normally use the bath the next day. Whether it’s an old repair that has yellowed or come loose and a chipped rim or side, we can usually put it right, whatever the material.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Milbury Heath (GL12)
- County
- Gloucestershire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
When to call us in Milbury Heath
A cracked acrylic bath generally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex.
These are the problems we’re asked about most:
- A kit repair that didn’t last
- Impact holes in acrylic
- Snagging damage from a refit
- Scratches you can feel with a fingernail
What to look for in a quote
- If travel is included in the price
- What the guarantee covers, and for how long
- How to care for the finish
- Whether a trained technician does the job
How the visit works
You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It generally takes a morning or an afternoon, and you can get on with other things while we’re there.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Keep children and pets away from the room on the day
- Open a window if you can
- Make sure the area is dry
Getting a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Related advice
Milbury Heath and nearby
Milbury Heath is about 1 mile east of Thornbury, in Gloucestershire. Customers in Milbury Heath get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover all 470 towns and villages across Gloucestershire. Our jobs stretch from Milbury Heath to Birmingham (65 miles away).
Postcode districts we cover here: GL12. Other places close to Milbury Heath include Buckover (1 mile north), The Hacket (1 mile west), Townwell (2 miles east), Heath End (2 miles east) and Sundayshill (2 miles north). We also work in nearby towns such as Stroud (14 miles north-east), Lydney (8 miles north), Cam (8 miles north-east), Stonehouse (13 miles north-east), Dursley (8 miles north-east) and Tetbury (14 miles east).
What’s near Milbury Heath
Typical jobs here are in homes near Crossways Junior School, St Paul's and The Castle School. Nearby you will also find Thornbury and District Museum (1.7 miles west) and Thornbury Castle (1.9 miles west). Not far away are Red Hill.
What bath repair costs
Prices start from £95. A fixed quote means you know the cost before booking. We take into account:
- The size and number of damaged areas
- The material and finish
- How hard the colour is to match
- Where the damage is and how we get to it
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Before you send photos, a few simple things make all the difference:
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Rinse it down after each bath
- Put a towel in the bath if you’re working above it
- Stick to mild cleaners and a soft cloth
- Have new chips seen to early
A repaired bath needs no special treatment. Skip bleach and gritty creams and rinse after use.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Towns and villages near Milbury Heath
More services for Milbury Heath
Landlord and trade work in Milbury Heath
For anyone letting property in or around Milbury Heath, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
Repair or replace in Milbury Heath?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
What you get with us
- Straight answers about what a repair can do
- Usually one visit, start to finish
- No extra charge for your area
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
