Gloucestershire · England
Bath Repair for Townwell homes
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Townwell. Free, fixed quotes from your photos.
- Repairs from £95
- Cracks in an acrylic bath
- Rust spots around the plughole
Common questions in Townwell
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before and we’ll plan for it.
Can you price it without visiting?
Normally, yes. Clear photos let us give you a fixed price without visiting.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
What areas do you cover?
The whole UK, including all of Gloucestershire. Send your postcode with your pictures and we’ll offer you dates.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Bath repair in Townwell without replacing anything
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you are dealing with a chipped rim or side and rust by the waste and overflow, we can normally put it right, on roll-top & freestanding, acrylic and pressed steel enamel alike.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Townwell (GL12)
- County
- Gloucestershire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
So the finish stays in good condition:
- Stick to mild cleaners and a soft cloth
- Do not leave razors or cans standing in the bath
- Keep abrasive pads and gritty cleaners away from the bath
- Give the bath a quick rinse after use
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
When a repair isn’t the answer
A repair isn’t right for every job, for example:
- A bath that moves underfoot, until its support is fixed
- Cracks in parts of an acrylic bath we cannot get to from below
- Metal that has corroded all the way through
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Townwell
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
What we are called out for in Townwell
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
Common reasons people in Townwell contact us are:
- A cracked acrylic bath
- Rust by the waste and overflow
- Holes from dropped items
- Chips on the rim or sides
Questions to ask before you book
- How soon you can use it again
- How changes to the job are handled
- What aftercare is recommended
- Whether the price is fixed and includes VAT
Covering Townwell
Townwell is about 3 miles east of Thornbury, in Gloucestershire. Whether you are in the middle of Townwell or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Townwell is one of 470 places in Gloucestershire we cover. Our jobs stretch from Townwell to Birmingham (64 miles away).
Here we cover the GL12 postcode area. Streets in the area include Bristol Road and Church Lane. Neighbouring places we cover include Bibstone (1 mile north-east), Heath End (1 mile south), Churchend (1 mile east), Buckover (2 miles west) and Falfield (2 miles north-west). Larger places within reach include Stroud (13 miles north-east), Lydney (9 miles north-west), Cam (7 miles north-east), Stonehouse (12 miles north-east), Dursley (6 miles north-east) and Tetbury (12 miles east).
Near you in Townwell
In Townwell, that means homes near The Royal Oak pub, St Andrew's Church of England Primary School and Parish Church of St Andrew. For rail, the closest station is Yate station, roughly 5 miles south of the centre. Well-known places in the area include Thornbury and District Museum (3.7 miles west) and Thornbury Castle (3.9 miles west). Green spaces nearby include Nind Nature Reserve.
The process
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on the damage, and we finish with a tidy-up and a look at the finished work together.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Let us know which floor the room is on
- Clear toiletries, mats and anything else from around the area
- Ensure the room can be ventilated
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Related advice
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
More services for Townwell
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Prices start from £95. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Every repair guaranteed for a year
- Honest advice, even when it means no job
- Rooms protected and left tidy
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page and bath cost comparison.
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- The colour and finish to match
- The material
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- Any details about the material
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
About our accreditations · Every repair comes with a one-year guarantee.
