Gloucestershire · England
Bath chip & crack repair in Milkwall, Gloucestershire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Milkwall. Send photos for a free, fixed quote.
- Repairs from £95
- Chips caused by builders
- A kit repair that didn’t last
How we price bath repair
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- The size and number of damaged areas
- Whether we combine several jobs
- The material and finish
- Access to the area
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
Send pictures for a quote
Most quotes are done from photos alone. To make it quick:
- Natural light rather than flash
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- A photo taken from further back
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
How we handle bath repair in Milkwall
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include cracks in an acrylic bath and a chipped rim or side, in roll-top & freestanding, pressed steel enamel and whirlpool & spa baths.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Location
- Milkwall (GL16)
- County
- Gloucestershire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
Send us pictures and we will tell you honestly.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What we do, step by step
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for two to three hours for most chips. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the next day, the bath is ready to use.
Before we arrive
- Make sure the room can be ventilated
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
Getting a price
Upload a picture of the damage and one of the whole item, with your GL16 postcode, and we’ll come back with a fixed quote.
Read more
Do you need bath repair in Milkwall?
Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex until it cracks.
Signs it’s time to call us include:
- Holes from dropped items
- Rust spots around the plughole
- Damage beneath the taps
- A chipped rim or side
Comparing quotes
- A fixed price, and whether VAT is included
- Aftercare advice
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
Repair or replace in Milkwall?
People frequently assume a cracked or chipped bath has to come out. Usually it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why choose Surface Doctor in Milkwall
- Honest advice, even when it means no job
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the entire UK
- We leave the room as we found it
Read our full price list or guide to resurfacing and replacement costs.
Towns and villages near Milkwall
Other services in Milkwall
Milkwall: your questions answered
Which areas do you work in?
Across the UK, and that includes Milkwall. Our prices are the same everywhere.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
When can I have a bath again?
Normally by the following day, though it depends on what we’ve done.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
How invisible is a bath repair?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed price includes everything.
Covering Milkwall
Milkwall is about 9 miles south of Ross-on-Wye, in Gloucestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover 470 places across Gloucestershire. You can also see our page for Birmingham, about 56 miles away.
Jobs in GL16 are booked in the same way as anywhere else. From Station Road, Primrose Drive and Foxglove Way or a nearby road, a technician can come to you. Neighbouring places we cover include Sling (1 mile south), Clearwell (1 mile south-west), Coleford (1 mile north-west), Whitecliff (1 mile north-west) and Baker's Hill (1 mile north). We also work in nearby towns such as Quedgeley (14 miles east), Lydney (5 miles south-east), Kingsway Village (14 miles east), Cam (12 miles south-east), Stonehouse (14 miles east) and Dursley (13 miles south-east).
What’s near Milkwall
In Milkwall, that means homes near Five Acres High School, Spion Kop Quarry and Coalway Community Infant School, among other places. Well-known places in the area include Rock Castle (1.1 miles north-west) and Dilke Memorial Hospital (4.2 miles north-east). Green spaces nearby include The Kymin and Prisk Wood.
About our accreditations · Every repair comes with a one-year guarantee.
