Cambridgeshire · England
Bath chip & crack repair in Mill Green, Cambridgeshire
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Mill Green. Send pictures for a free, fixed quote.
- Repairs from £95
- Scratches you can feel with a fingernail
- A failed DIY repair that is discoloured or lifting
Where we work around Mill Green
Mill Green is about 3 miles west of Haverhill, in Cambridgeshire. Anywhere in CB21, we come to you. We cover all 371 towns and villages across Cambridgeshire, from the larger towns to small villages. You can also see our page for London, about 45 miles away.
Here we cover the CB21 postcode area. We also cover the places around Mill Green: Shudy Camps (1 mile south-west), Cardinal's Green (1 mile north), Castle Camps (1 mile south-east), Steventon End (2 miles south-west) and Bartlow (2 miles west). Larger places within reach include Cambridge (13 miles north-west), Newmarket (11 miles north), King's Hedges (14 miles north-west), Arbury (14 miles north-west), Chesterton (13 miles north-west) and Orchard Park (15 miles north-west).
Local landmarks in Mill Green
Our clients here include homes close to Church of St Mary. Further afield, we also cover the area around Castle Camps (1.8 miles south) and Bartlow End (2.5 miles south-west). Not far away are Hales and Shadwell Woods and Rivey Hill.
Bath repair in Mill Green without replacing anything
Most of our bath repairs take a few hours, and the bath is back in use the day after. You won’t need a plumber or tiler, because the bath does not move. Whether it’s scuffs and scratches in the surface and chips caused by builders, we can help, on cast iron enamel, whirlpool & spa baths and roll-top & freestanding alike.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Mill Green (CB21)
- Region
- Cambridgeshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
In fairness, some problems need a different fix:
- Metal that has corroded all the way through
- Cracks in acrylic we cannot reach from underneath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we’ll tell you honestly.
Materials we work on in Mill Green
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
What affects the price in Mill Green
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- Doing more than one item at once
- Unusual colours or finishes
- How much damage there is
- What kind of damage it is
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
When you take your photos, a few simple things make all the difference:
- Details of any past repairs
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- One picture of the entire bath
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
When to call us in Mill Green
Rust normally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Signs it’s time to call us include:
- A hole punched through by something heavy
- Snagging damage from a refit
- Chips along the edge of the bath
- An old repair that has yellowed or come loose
What your quote should include
- Whether the colour is mixed to match
- Whether cleaning and preparation are in the price
- Who turns up on the day
- What protection goes down before work starts
Your questions about bath repair in Mill Green
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before and we will plan for it.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Work for landlords and builders
If you manage property in Mill Green, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Repairing versus replacing in Mill Green
People frequently assume a cracked or chipped bath has to come out. Generally it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Our bath repair starts from £95. Our prices are the same across the UK, so there’s no premium for Mill Green. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Honest advice, even when it means no job
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
See our prices page or bath cost comparison.
Also near Mill Green
Other services in Mill Green
How the visit works
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours, depending on the damage.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
