West Berkshire · England
Bath chip & crack repair in Mill Green, West Berkshire
Bath repair in Mill Green without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- Chips along the edge of the bath
- A kit repair that didn’t last
How we handle bath repair in Mill Green
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. If you are dealing with snagging damage from a refit and holes from dropped items, we can normally put it right, whatever the material.
You get a one-year guarantee, the same in Mill Green as everywhere else we work.
- Location
- Mill Green (RG19)
- Region
- West Berkshire
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
Arrival times are agreed in advance, so you know when to expect us. On site, it takes a few hours. The room is left tidy and ready to use once it has cured.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Make sure the room can be ventilated
- Make sure the area is dry
- Let us know if it has been repaired before
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Also near Mill Green
Other services in Mill Green
Mill Green: your questions answered
How do I get a price for bath repair in Mill Green?
Repairs from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your RG19 postcode.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Which areas do you work in?
The entire UK, including all of West Berkshire. Just include your postcode and we will confirm dates.
Can you repair something that’s been repaired before?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Will the repair show?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
What affects the price in Mill Green
Prices start from £95. A fixed quote means you know the cost before booking. We take into account:
- How hard the colour is to match
- Previous DIY repairs that have to come out
- How many areas need work
- Whether we combine several jobs
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire bath
- The material, if you know it
For a price in Mill Green, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Aftercare tips
Nothing complicated is needed:
- Rinse it down after each bath
- Do not leave a fresh chip for long
- Fix dripping taps early to stop staining and limescale
- Keep metal cans and razors off the surface
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
What we’re called out for in Mill Green
Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Clients typically contact us about:
- Snagging damage from a refit
- A hole punched through by something heavy
- Deep scratches in acrylic
- A kit repair that didn’t last
Questions to ask before you book
- How long it needs to cure
- Whether they match the colour on site
- How to look after the finish
- Who will actually do the work
What we can’t put right
Some jobs aren’t right for a repair, for example:
- A steel bath rusted through
- Wear across the whole surface, which needs re-enamelling
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
Should you replace it?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why Mill Green clients choose us
- A fixed quote before you book
- We leave the room as we found it
- Colour-matched on site
- We come to you, anywhere in the UK
Take a look at our full price list and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Mill Green and nearby
Mill Green is about 3 miles south of Thatcham, in West Berkshire. We travel to clients in Mill Green, so nothing has to leave your home. We cover 155 places across West Berkshire. Our nearest city page is London, about 50 miles away.
Postcode districts we cover here: RG19. If you’re just outside Mill Green, we cover Headley (1 mile west), Goose Hill (1 mile east), Plastow Green (1 mile south), Crookham (1 mile north-east) and Heads Hill (1 mile north-west). Larger places within reach include Newbury (4 miles north-west), Thatcham (3 miles north), Burghfield Common (8 miles east), Speenhamland (5 miles north-west), Hungerford (12 miles west) and Spencers Wood (12 miles east).
What’s near Mill Green
In Mill Green, that means homes near The Travellers Friend pub, New Greenham Park and Church of St Peter. For rail, the closest station is Thatcham station, roughly 2 miles north. Well-known places in the area include West Berkshire Community Hospital (3.6 miles north-west) and Old Chapel Textile Centre (1.7 miles west). For a walk, there is Ladle Hill and Thatcham Reed Beds.
About our accreditations · Every repair comes with a one-year guarantee.
