Greater London · England
Bath chip & crack repair in Millbank, Greater London
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Millbank. Send pictures for a free, fixed quote.
- Repairs from £95
- Damage beneath the taps
- Rust spots around the plughole
When to call us in Millbank
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Send us a picture if you notice any of these:
- Holes from dropped items
- Chips along the edge of the bath
- Hairline or through cracks in acrylic
- Rust by the waste and overflow
Comparing quotes
- If travel is included in the price
- What happens if the damage is worse than the photos show
- A fixed quote, and whether VAT is included
- Whether the colour is mixed to match
Bath repair in Millbank, done in place
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the repaired area is colour matched so it blends in. We work on acrylic, cast iron enamel and whirlpool & spa baths, and the jobs we see most are a kit repair that didn’t last and snagging damage from a refit.
All of our repairs are guaranteed for twelve months in Millbank and everywhere else. We return to put right any problem with the work.
- Area
- Millbank (SW1P, W1J, SW1V)
- County
- Greater London
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath repair in Millbank
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Do you cover Millbank?
We do. We send a technician to Millbank for every job, with no extra charge for travel.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we will plan for it.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
I tried a repair kit. Can you fix it?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Repair or replace: which is better?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- One price list for the whole UK
- Colour mixed on the day to match
- One-year guarantee on every repair
- One visit for most repairs
Take a look at our full price list or bath cost comparison.
What a repair cannot fix
A repair is not always the answer, and we’ll tell you before we start. We can’t fix:
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we cannot reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Millbank
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
How we price bath repair
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- What the surface is made of
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- Access to the area
Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- A wider photo showing the whole bath
- Any details about the material
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
Email us pictures of the damage and one of the whole item, and tell us you’re in Millbank, and we will come back with a fixed quote.
Towns and villages near Millbank
Also in Millbank
How to look after the repair
Nothing complicated is needed:
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
- Have new chips seen to early
- A dripping tap stains enamel, so fix it early
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
The process
We agree an arrival time beforehand. On site, it takes a morning or an afternoon for most jobs. The room is left tidy.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
- Have a window or extractor fan available
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you’re under no obligation.
Related advice
Covering Millbank
Millbank is about 1 mile south-east of City of Westminster, in Greater London. Our technicians come to homes and businesses in Millbank, so nothing has to leave your home. Millbank is one of 764 towns and villages in Greater London where we work.
All of SW1P, W1J and SW1V is covered, from the main roads to the quietest streets. Streets in the area include Eaton Lane, Wilton Road and Castle Lane, and we cover them all. With the A4 and A202 close by, Millbank is easy for our technicians to reach. If you’re just outside Millbank, we cover Westminster (1 mile north), Victoria (1 mile south-west), Pimlico (1 mile south), Vauxhall (1 mile south-east) and Lambeth (1 mile south-east). We also work in nearby towns such as Kensington (3 miles west), Shoreditch (3 miles north-east), Walthamstow (8 miles north-east), Hoxton (3 miles north-east), Whitechapel (3 miles north-east) and Hampstead (4 miles north-west).
Near you in Millbank
Our customers here include homes close to Harris Westminster Sixth Form, St Matthew's School and Grafton Arms and the streets around them. You will also find London Library (0.6 miles north), Christ Church (within half a mile south-west), Blewcoat School (within half a mile south-west) and St James's Park (within half a mile north). Millbank’s nearest station is London Victoria station, roughly 0.6 miles south-west of the centre. Nearby you’ll also find Kingly Court (0.9 miles north) and Westminster St Margaret and St John (under half a mile north). The countryside around Millbank includes St. James's Park Lake and Ludgate Hill.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
