Greater London · England
Bath chip & crack repair in Victoria, Greater London
Damaged bath in Victoria? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- A chipped rim or side
- Rusty patches near the plughole
Bath repair in Victoria, done in place
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. Whether it’s hairline or through cracks in acrylic and chips caused by builders, we can usually put it right.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Victoria (SW1V, SW1P, SW1X)
- Region
- Greater London
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Avoid scourers, wire wool and gritty cream cleaners
- Protect the bath with a towel when doing jobs nearby
- Rinse it down after each bath
- Ensure an acrylic bath is firm underfoot
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
What affects the price in Victoria
Prices start from £95. Prices are worked out job by job. The main factors are:
- Whether we combine several jobs
- Access to the area
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Please include:
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
What a repair can’t fix
Some jobs are not right for a repair, including:
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we can’t reach from underneath
Not sure? Send photos and we will give you a straight answer.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
FAQs for Victoria
Something went through my bath. Can it be fixed?
Usually. Photos of the hole and the underside help us check.
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
What happens next?
We review the photos and send a fixed quote.
Can rust on a bath be repaired?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before and we’ll plan for it.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Do you come to Victoria?
Yes, we do. We send a technician to Victoria for every job, with no extra charge for travel.
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we will ask for another angle.
Signs you need bath repair in Victoria
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
Typical reasons for a call-out include:
- A hole punched through by something heavy
- A kit repair that didn’t last
- Snagging damage from a refit
- Scuffs and scratches in the surface
What your quote should include
- Whether a trained technician does the job
- What aftercare is recommended
- What happens if they find more damage
- Whether the price is fixed and includes VAT
Victoria and nearby
Victoria is about 1 mile south of City of Westminster, in Greater London. Our technicians come to homes and businesses in Victoria and the surrounding area, so you do not need to take anything anywhere. We cover all 764 towns and villages in Greater London.
Our visits in SW1V, SW1P and SW1X work the same way as everywhere else we cover. Jobs here include addresses on Eaton Lane, Gerald Road and Wilton Road. You will find Victoria on the A202 and A302, so it’s easy for us to reach. If you’re just outside Victoria, we cover Belgravia (1 mile north-west), Pimlico (1 mile south-east), Westminster (1 mile north-east), Millbank (1 mile north-east) and Brompton (1 mile west). We also work in nearby towns such as Shoreditch (4 miles north-east), Walthamstow (8 miles north-east), Hoxton (4 miles north-east), Whitechapel (4 miles north-east), Hampstead (4 miles north) and Ruislip (13 miles north-west).
What’s near Victoria
Our clients here include homes close to Westminster City School, Westminster Cathedral Choir School and St. Michael's Church and the streets around them. Other local landmarks include Green Park (0.6 miles north), St Peter's Eaton Square CofE Primary School (within half a mile north-west), London Library (0.9 miles north) and Wetherspoons pub (under half a mile east). Victoria has its own railway station: London Victoria station. Nearby you’ll also find Baynard's Castle (2.2 miles north-east) and Health Exhibition Centre (under half a mile south-west). For a walk, there’s Ludgate Hill and St. James's Park Lake.
- Other local spots include Westminster St Margaret and St John (0.6 miles north-east)
Towns and villages near Victoria
More services for Victoria
The process
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. Most visits take a few hours, depending on the damage, tidy-up included.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Make sure the room can be ventilated
- Ensure the area is dry
- Tell us about any previous repairs or coatings
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Related advice
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Greater London and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For anyone letting property in or around Victoria, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Repairing versus replacing in Victoria
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why Victoria customers choose us
- CHAS, Constructionline and SafeContractor accredited
- One visit for most repairs
- Fixed prices from your pictures
- Every repair guaranteed for a year
See our full price list and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
