Highland · Scotland
Bath chip & crack repair in Millburn, Highland
Fixed-price bath repair in Millburn and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Hairline or through cracks in acrylic
- A hole punched through by something heavy
About our bath repair in Millburn
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Whether it’s a failed DIY repair that’s discoloured or lifting and scratches you can feel with a fingernail, we can help, on cast iron enamel, roll-top & freestanding and pressed steel enamel alike.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Millburn (IV2, IV1, IV99)
- Region
- Highland
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
The process
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a morning or an afternoon. We clean up when we are done and let you know when you can use it again.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
- Open a window if you can
How to get a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Read more
Landlords, agents and businesses in Millburn
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
For anyone letting property in or around Millburn, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Other services in Millburn
When to call us in Millburn
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Typical reasons for a call-out include:
- A hole punched through by something heavy
- Chips caused by builders
- Rusty patches near the plughole
- A kit repair that didn’t last
Questions to ask before you book
- How the room is protected while they work
- How the colour is matched
- Aftercare advice
- How changes to the job are handled
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Millburn questions
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Is a cracked acrylic bath repairable?
Usually, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Is a repair better than a new one?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Repair or replace: which is better?
Many people think a damaged bath means a new one. Typically it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why choose Surface Doctor in Millburn
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- One price list for the whole UK
Read our prices page and bath cost comparison.
What bath repair costs
Repairs from £95. You won’t pay by the hour. The price is based on:
- What the surface is made of
- Any earlier repairs that need removing first
- How many items we do on one visit
- The type of damage
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Quotes from your photos
Phone photos are fine. Just make sure we can see:
- The material, if you know it
- Natural light rather than flash
- Your postcode, so we can check dates
- Any earlier repairs or coatings
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
How to look after the repair
It’s all simple stuff:
- Don’t leave razors or cans standing in the bath
- Clean with warm water and a mild detergent
- Check that an acrylic bath does not move when you stand in it
- Avoid scourers, wire wool and gritty cream cleaners
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Where we work around Millburn
Millburn is about 1 mile north-east of Inverness, in Highland. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in all 253 towns and villages across Highland, from the larger towns to small villages.
We work across IV2, IV1 and IV99 and the streets around it. Whether you live on Union Road, Crown Road and Lovat Road or a nearby road, a technician can come to you. Neighbouring places we cover include Crown (1 mile south), Longman (1 mile north-west), Inverness (1 mile south-west), Merkinch (1 mile west) and Hilton (1 mile south). Within a short drive, we also cover Nairn (14 miles north-east), Cradlehall (3 miles east), Dingwall (12 miles north-west), Alness (15 miles north), Invergordon (15 miles north) and Muir of Ord (10 miles west). If you’re somewhere remote, ring us first and we will plan the trip.
Local landmarks in Millburn
Typical jobs here are in homes near Millburn Academy, Imperial Bar and Cavell Gardens, among other places. The nearest railway station is Inverness station, about 0.5 miles west of the centre. Other landmarks nearby include Inverness Castle (0.7 miles south-west) and Eastgate Shopping Centre (less than half a mile south-west). Open spaces near Millburn include Tomnahurich.
About our accreditations · Every repair comes with a one-year guarantee.
