Nottinghamshire · England
Bath Repair for Moorgreen homes
Our technicians come to Moorgreen for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Scuffs and scratches in the surface
- Chips caused by builders
Bath repair at your home in Moorgreen
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We’re frequently asked to fix chips along the edge of the bath and hairline or through cracks in acrylic, in cast iron enamel, pressed steel enamel and whirlpool & spa baths.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Moorgreen (NG16)
- Area hub
- Nottinghamshire
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Check that an acrylic bath does not move when you stand in it
- Do not scrub with anything abrasive
- A dripping tap stains enamel, so fix it early
- Stick to mild cleaners and a soft cloth
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
How it works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take two to three hours for most chips, and we will tell you if anything changes.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the day after, the bath is ready to use.
Before we arrive
- Make sure the area is dry
- Make sure the room can be ventilated
- Mention any parking restrictions or tricky access
Getting a price
If you’re in Moorgreen and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Why repair rather than replace?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Moorgreen clients choose us
- Same prices wherever you are
- One visit for most repairs
- A fixed quote before you book
- Colours mixed by hand to suit your surface
Read our prices page or resurfacing vs replacement cost guide.
Landlords, agents and businesses in Moorgreen
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What else we do in Moorgreen
Common problems we fix in Moorgreen
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
The most common problems we are called about are:
- An old repair that has yellowed or come loose
- Deep scratches in acrylic
- Rusty patches near the plughole
- Hairline or through cracks in acrylic
Comparing quotes
- What aftercare is recommended
- Whether the colour is mixed to match
- Whether a trained technician does the job
- How long it needs to cure
Moorgreen and nearby
Moorgreen is about 1 mile north-east of Eastwood, in Nottinghamshire. Across the NG16 area, a technician comes to you. Moorgreen is one of 329 towns and villages in Nottinghamshire where we work. You can also see our page for Birmingham, about 46 miles away.
We work across NG16. Close by, we cover Greasley (1 mile south-east), Newthorpe (1 mile south-west), Eastwood (1 mile south-west), Giltbrook (1 mile south) and Watnall (2 miles south-east). Further out, we also cover Mansfield (9 miles north-east), Beeston (7 miles south), Carlton (9 miles south-east), Sutton in Ashfield (7 miles north), Hucknall (3 miles east) and West Bridgford (9 miles south-east).
Landmarks near Moorgreen
We visit homes around St. Mary's Church, Hall Park Academy and Greasley Beauvale Primary School. The closest station to Moorgreen is Langley Mill station, roughly 2.3 miles west of the centre. Nearby you’ll also find Greasley Castle (within half a mile south-east) and Ilkeston Hospital (3 miles south-west).
FAQs for Moorgreen
Can you repair a failed DIY repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
How long before I can use the bath?
Most baths can be used the next day. We’ll tell you the exact curing time when we finish.
Do you come to Moorgreen?
Yes, we do. We send a technician to Moorgreen for every job, with no extra charge for travel.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed price includes everything.
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair won’t do:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
Send us photos and we’ll tell you honestly.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How we price bath repair
Repairs from £95. We give every job a fixed price from photos. This is what makes a difference:
- Doing more than one item at once
- Access to the area
- The colour and finish to match
- The material and finish
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Send photos for a quote
When you take your photos, these tips help us give you a firm price:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- Any earlier repairs or coatings
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
