Nottinghamshire · England
Bath chip & crack repair in Greasley, Nottinghamshire
Bath repair in Greasley without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- A cracked acrylic bath
- Rust by the waste and overflow
Bath repair in Greasley, done in place
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can usually use the bath the day after. We work on roll-top & freestanding, cast iron enamel and acrylic, and people most often call us about a failed DIY repair that’s discoloured or lifting and hairline or through cracks in acrylic.
Every repair is covered by a one-year guarantee.
- Area
- Greasley (NG16)
- County
- Nottinghamshire
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Aftercare tips
After the repair has cured, a few habits help it last:
- Don’t leave razors or cans standing in the bath
- Avoid scourers, wire wool and gritty cream cleaners
- Put a towel in the bath if you’re working above it
- A dripping tap stains enamel, so fix it early
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
Prices and what affects them
Repairs from £95. You’ll know the full cost before booking. We look at:
- The material
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- A clear, close picture of the problem area
- Any details about the material
- Natural light rather than flash
- A coin beside the damage so we can judge size
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
What we cannot put right
It helps to know what we cannot do too:
- Leaking fittings, which need a plumber
- A steel bath rusted through
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we’ll say what we think.
Materials we work on in Greasley
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
The process
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to a few hours, depending on the damage, tidy-up included.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Make sure the room can be ventilated
- Point us to the nearest place to park
- Clear the area around the damage
Get a quote
Email us pictures of the damage and a wider shot of the entire item, with your NG16 postcode, and we will come back with a fixed quote.
Read more
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Greasley: your questions answered
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. If there is more, we will tell you before starting.
How much does bath repair cost in Greasley?
Prices start from £95. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Something went through my bath. Can it be fixed?
Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Is repairing better than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Repairing versus replacing in Greasley
Many people think a damaged bath means a new one. Normally it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Why Greasley clients choose us
- Colour-matched on site
- Most jobs done in one visit
- No extra charge for your area
- Everything repaired in place
Take a look at our pricing and bath cost comparison.
About Greasley
Greasley is about 1 mile north-east of Eastwood, in Nottinghamshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Greasley is one of 329 towns and villages in Nottinghamshire we cover. Our nearest city page is Birmingham, about 46 miles away.
All of NG16 is covered, from the main roads to the quietest streets. Nearby, we also work in Moorgreen (1 mile north-west), Newthorpe (1 mile south-west), Giltbrook (1 mile south-west), Watnall (1 mile south-east) and Eastwood (1 mile west). Within a short drive, we also cover Mansfield (9 miles north), Beeston (7 miles south), Carlton (8 miles south-east), Sutton in Ashfield (7 miles north), Hucknall (3 miles east) and West Bridgford (9 miles south-east).
Local landmarks in Greasley
In Greasley, that means homes near St. Mary's Church, The Kimberley School and Greasley Beauvale Primary School and the streets around them. For rail, the closest station is Langley Mill station, roughly 2.7 miles west of the centre. Well-known places in the area include Greasley Castle (less than half a mile west) and Kawasaki Museum (2.8 miles south-east).
Signs you need bath repair in Greasley
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move.
Common reasons people in Greasley contact us include:
- Scratches you can feel with a fingernail
- Snagging damage from a refit
- A kit repair that didn’t last
- Rusty patches near the plughole
What your quote should include
- Whether cleaning and preparation are in the price
- How the colour is matched
- Whether the price covers travel
- How your room will be protected
Other services in Greasley
About our accreditations · Every repair comes with a one-year guarantee.
