Somerset · England
Bath Repair in Moorlinch
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Moorlinch, with a one-year guarantee on every repair.
- Repairs from £95
- Chips along the edge of the bath
- Chips caused by builders
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us photos and we will tell you honestly before booking.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
About our bath repair in Moorlinch
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We are often asked to fix holes from dropped items and chips on the rim or sides, on whirlpool & spa baths, roll-top & freestanding and acrylic.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Location
- Moorlinch (TA7)
- County
- Somerset
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Moorlinch and nearby
Moorlinch is about 6 miles east of Bridgwater, in Somerset. Clients in Moorlinch get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Moorlinch is one of 640 towns and villages in Somerset we cover.
Every address in TA7 is covered. We regularly work on streets such as Spring Lane and Moor Road and the roads around them. If you’re just outside Moorlinch, we cover Shapwick (1 mile north-east), Pedwell (2 miles east), Catcott (2 miles north), Sutton Mallet (2 miles west) and Nythe (2 miles south-east). We also work in nearby towns such as Taunton (13 miles south-west), Bridgwater (6 miles west), Burnham-on-Sea (10 miles north-west), Wells (11 miles north-east), Shepton Mallet (14 miles east) and Street (5 miles east).
What’s near Moorlinch
In Moorlinch, that means homes near Shapwick School, Ring O' Bells pub and Church of St Mary and the streets around them. Nearby you will also find Sedgemoor (2.6 miles east) and Bridgwater Community Hospital (5.1 miles west). The countryside around Moorlinch includes Burrow Mump and Ham Wall.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Common problems we fix in Moorlinch
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Customers generally contact us about:
- Chips along the edge of the bath
- Deep scratches in acrylic
- Holes from dropped items
- A chip where the taps sit
Comparing quotes
- Whether cleaning and preparation are in the price
- How changes to the job are handled
- How long the guarantee is and what it covers
- Whether the colour is mixed to match
FAQs for Moorlinch
What if the damage is worse than the photos show?
The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.
Are there extra charges for Moorlinch?
We do not add a call-out fee. The fixed price covers the visit and the work.
How much does bath repair cost in Moorlinch?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
How invisible is a bath repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
How the visit works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
Get a quote
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Advice
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Keep abrasive pads and gritty cleaners away from the bath
- Protect the bath with a towel when doing jobs nearby
- Fix dripping taps early to stop staining and limescale
- Get any new chip repaired before it rusts
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- Every repair guaranteed for a year
- No need to remove anything
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
Read our full price list or bath cost comparison.
Towns and villages near Moorlinch
What else we do in Moorlinch
Repairs by material
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
