Somerset · England
Bath chip & crack repair in Nythe, Somerset
Bath repair in and around Nythe: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rusty patches near the plughole
- A kit repair that didn’t last
Bath repair in Nythe without replacing anything
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. We regularly repair roll-top & freestanding, whirlpool & spa baths and acrylic, and common reasons people get in touch are damage done while the bathroom was being fitted and rusty patches near the plughole.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Nythe (TA7)
- County
- Somerset
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Nythe and the surrounding area
Nythe is about 8 miles east of Bridgwater, in Somerset. From the centre of Nythe to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover 640 places across Somerset, from the larger towns to small villages.
Every address in TA7 is within our area. If you are just outside Nythe, we cover Pedwell (1 mile north), Ashcott (2 miles north-east), Moorlinch (2 miles north-west), Shapwick (2 miles north) and Sutton Mallet (3 miles north-west). Further out, we also cover Taunton (14 miles south-west), Bridgwater (8 miles west), Yeovil (14 miles south-east), Burnham-on-Sea (11 miles north-west), Wells (10 miles north-east) and Shepton Mallet (13 miles north-east).
Near you in Nythe
Locally, our jobs take us to homes close to Shapwick School. Other landmarks nearby include Sedgemoor (2 miles north-east) and Clarks Village (4 miles east). For a walk, there’s Burrow Mump and Ham Wall.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Leaking fittings, which need a plumber
- Wear across the whole surface, which needs re-enamelling
- Metal that has corroded all the way through
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What else we do in Nythe
Landlords, agents and businesses in Nythe
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Nythe as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
How to look after the repair
Looking after the surface is easy:
- Check that an acrylic bath doesn’t move when you stand in it
- Keep metal cans and razors off the surface
- Rinse the bath after use, especially in hard water areas
- Don’t leave a fresh chip for long
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Prices and what affects them
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- How hard the colour is to match
- How much damage there is
- What the surface is made of
- Any earlier repairs that need removing first
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Send photos for a quote
Two or three clear photos are usually enough. Try to include:
- What it’s made of, if you know
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Any earlier repairs or coatings
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a few hours. We clean up when we’re done and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the day after.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
How to get a price
To get a price, send two or three pictures through our quote form or call us. We will say immediately whether it can be repaired.
Read more
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
What you get with us
- A year’s guarantee on all work
- CHAS and Constructionline accredited
- Technicians who travel to you, UK-wide
- No need to remove anything
Read our pricing and resurfacing vs replacement cost guide.
Your questions about bath repair in Nythe
Can a cracked acrylic bath be fixed?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
I tried a repair kit. Can you fix it?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
About our accreditations · Every repair comes with a one-year guarantee.
