Edinburgh · Scotland
Bath Repair in Moredun
Bath repair in Moredun without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- Chips on the rim or sides
- A chip where the taps sit
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
- A fixed quote before booking
- Work done at your home or business
See our prices page and resurfacing vs replacement cost guide.
Bath repair at your home in Moredun
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. We are often asked to fix a cracked acrylic bath and a failed DIY repair that’s discoloured or lifting, across pressed steel enamel, whirlpool & spa baths and acrylic.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Moredun (EH17, EH16)
- County
- Edinburgh
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath repair in Moredun
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Do you cover Moredun?
We do. We send a technician to Moredun for every job, and the price is the same as everywhere else.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Which areas do you work in?
We work UK-wide, so Moredun is covered. Our prices are the same everywhere.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Nearby places to Moredun
More services for Moredun
What we do, step by step
The work is clean and fairly quiet. We protect the area first, then the job itself takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Ensure the room can be ventilated
How to get a price
To get a price, send a couple of photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Related advice
How to look after the repair
Simple care helps the repair last. We recommend:
- Give the bath a quick rinse after use
- Get any new chip repaired before it rusts
- Protect the bath with a towel when doing jobs nearby
- Do not leave razors or cans standing in the bath
There’s nothing special to do after a repair. Avoid bleach-based and gritty cleaners and rinse after use.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Signs you need bath repair in Moredun
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
Signs it’s time to call us include:
- A kit repair that didn’t last
- Chips caused by builders
- Cracks in an acrylic bath
- A hole punched through by something heavy
Questions to ask before booking
- How changes to the job are handled
- The length of the guarantee and what it covers
- How the room is protected while they work
- Who turns up on the day
About Moredun
Moredun is about 3 miles north-west of Bonnyrigg, in Edinburgh. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Moredun is one of 175 towns and villages in Edinburgh where we work.
We cover every part of EH17 and EH16. Streets in the area include Drum Avenue, Gilmerton Road and Craigour Avenue, and we cover them all. Moredun sits on or near the A772, which makes travel easy. If you’re just outside Moredun, we cover Craigour (1 mile north-west), Fernieside (1 mile south-east), Ferniehill (1 mile south-east), Little France (1 mile north) and Ellen's Glen (1 mile south-west). Further out, we also cover Edinburgh (3 miles north-west), Leith (5 miles north), Bonnington (4 miles north-west), Greenside (4 miles north-west), Broughton (4 miles north-west) and Bellevue (4 miles north-west).
Near you in Moredun
In Moredun, that means homes near Drum Park, Liberton Parish Church and Liberton High School. Moredun’s nearest station is Shawfair station, roughly 1.8 miles east. Other landmarks nearby include Cameron Toll Shopping Centre (1.4 miles north-west) and Craigmillar Castle (0.9 miles north). Open spaces near Moredun include The New Leaf Co-op and Duddingston Loch.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
What a repair can’t fix
A repair is not right for every job, for example:
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
