Edinburgh · Scotland
Bath Re-enamelling in Moredun
Bath re-enamelling in Moredun without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A dull, rough surface that will not come clean
The process
Arrival times are agreed in advance, so you are not left guessing. On site, it takes most of the day in most cases. The room is left tidy and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
- Ensure the area is dry
Get a quote
Most customers in Moredun get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
Bath re-enamelling in Moredun, done in place
If your bath is sound but looks tired, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. Our repair technicians work on Victorian roll-tops, cast iron baths and acrylic baths, and common reasons people get in touch are thin, worn enamel in places and an old resurfacing that’s failing.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Location
- Moredun (EH17, EH16)
- County
- Edinburgh
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath re-enamelling in Moredun?
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, usually first under the taps and around the waste.
Signs it’s time to call us include:
- An old resurfacing that’s failing
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
- A dull, rough surface that will not come clean
What your quote should include
- The length of the guarantee and what it covers
- Whether cleaning and preparation are in the price
- How your room will be protected
- A fixed quote, and whether VAT is included
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from photos. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- Previous DIY repairs that have to come out
- The colour and finish to match
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
Good pictures mean an accurate price. Here’s what helps:
- Your postcode, so we can check dates
- One picture of the whole bath
- The material, if you know it
- A coin or ruler next to the damage for scale
Upload a photo of the damage and a wider shot of the whole item, with your EH17 postcode, and we will come back with a fixed quote.
Moredun and the surrounding area
Moredun is about 3 miles north-west of Bonnyrigg, in Edinburgh. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Moredun is one of 175 towns and villages in Edinburgh where we work.
We cover every part of the EH17 and EH16 postcode area and the streets around it. Jobs here include addresses on Drum Avenue, Gilmerton Road and Craigour Avenue. Moredun sits on or near the A772, so getting to you is simple. If you are just outside Moredun, we cover Craigour (1 mile north-west), Fernieside (1 mile south-east), Ferniehill (1 mile south-east), Little France (1 mile north) and Ellen's Glen (1 mile south-west). Within a short drive, we also cover Edinburgh (3 miles north-west), Leith (5 miles north), Bonnington (4 miles north-west), Greenside (4 miles north-west), Broughton (4 miles north-west) and Bellevue (4 miles north-west).
Near you in Moredun
Our customers here include homes close to Drum Park, Liberton Parish Church and Liberton High School, among other places. The nearest railway station is Shawfair station, roughly 1.8 miles east. Other landmarks nearby include Cameron Toll Shopping Centre (1.4 miles north-west) and Craigmillar Castle (0.9 miles north). For a walk, there is The New Leaf Co-op and Duddingston Loch.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Moredun: your questions answered
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we’ll plan for it.
Which areas do you work in?
Everywhere in the UK, Moredun included. Travel is included in the price.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Stick to gentle, non-abrasive cleaners
- Do not leave bottles, razors or sponges standing on the surface
- Do not let dyes or oils sit on the finish
- Get any chip repaired quickly
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Nearby places to Moredun
Also in Moredun
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.
Why us?
- Typically one visit, start to finish
- Repair technicians who travel to you, UK-wide
- No need to remove anything
- A fixed quote before you book
Take a look at our full price list and resurfacing vs replacement cost guide.
When we would advise against a repair
Some jobs are not right for a repair, for example:
- A bath that is rusted through
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly.
What we work on
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
