Cardiff · Wales

Bath chip & crack repair in Morganstown, Cardiff

Chip and crack repairs to enamel, acrylic and cast iron baths in Morganstown, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Snagging damage from a refit
  • Rust spots around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Morganstown homes

Can I fix it myself?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

Bath repair at your home in Morganstown

Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. Our technicians work on cast iron enamel, roll-top & freestanding and pressed steel enamel, and people most often call us about damage beneath the taps and chips on the rim or sides.

All our work is covered by our one-year guarantee.

Location
Morganstown (CF15, CF14)
Region
Cardiff
Warranty
One year on every repair
Price
From £95. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Should you replace it?

Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.

Why book with us

  • We’ll tell you if it’s not worth repairing
  • One price list for the whole UK
  • Repair technicians who travel to you, UK-wide
  • Colour mixed on the day to match

Take a look at our pricing or bath cost comparison.

Covering Morganstown

Morganstown is about 3 miles north of Ely, in Cardiff. Our repair technicians come to homes and businesses in Morganstown and the surrounding area, so you do not need to take anything anywhere. We cover 91 places in Cardiff.

All of CF15 and CF14 is covered. You’ll find streets such as Chapel Road, Ty-Nant Road and Market Street, all of which we cover. We also cover the places around Morganstown: Radyr and Morganstown (1 mile south), Tongwynlais (1 mile east), Gwaelod-y-garth (1 mile north), Georgetown (1 mile north-west) and Ffynnon Taf (1 mile north). We also work in nearby towns such as Cardiff (4 miles south-east), Ely (3 miles south), Castle (5 miles south-east), Adamsdown (5 miles south-east), Roath (5 miles south-east) and Splott (6 miles south-east).

Landmarks near Morganstown

Typical jobs here are in homes near Church of St Michael and All Angels, The Tynant Inn and Bryn Deri Primary School. You will also find Hailey Park (1.8 miles south-east) and Radyr Comprehensive School (1.5 miles south-east). The nearest railway station is Taffs Well station, roughly 0.9 miles north of the centre. Further afield, we also cover the area around Welsh Museum of Health and Medicine (0.8 miles south-east) and Creigiau & St Fagans (1.2 miles south-west). Green spaces nearby include Glamorgan Canal / Long Wood and Roath Park Lake.

Map of Morganstown © OpenStreetMap contributors

Materials and what they mean for the repair

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

Prices and what affects them

Prices start from £95. We give every job a fixed price from pictures. This is what makes a difference:

  • Any earlier repairs that need removing first
  • Access to the area
  • The material
  • The type of damage

Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Getting a price from photos

When you take your pictures, these tips help us give you a firm price:

  • What it’s made of, if you know
  • A clear, close picture of the problem area
  • Whether it’s been repaired or coated before
  • The postcode, so we can plan the visit

You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

The process

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, depending on the damage, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

Before we arrive

  • Keep a parking space free if you can
  • Let us know which floor the room is on
  • Move bottles, mats and clutter away from the area

Ask for a price

Upload a photo of the damage and a wider shot of the whole item, and tell us you are in Morganstown, and we will reply with a fixed price.

Send photos for a quote

Read more

Keeping it looking good

So the finish stays in good condition for years:

  • Get any new chip repaired before it rusts
  • Store metal items away from the bath
  • A dripping tap stains enamel, so fix it early
  • Clean with warm water and a mild detergent

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.

Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

Landlord and trade work in Morganstown

If you manage property in Morganstown, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

FAQs for Morganstown

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

Can I add another job to the visit?

Of course, and it usually saves money. Send pictures of everything together and we will quote them together.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Do you do work for letting agents?

Yes, often. We can quote for several properties together and work between tenancies.

What areas do you cover?

We work UK-wide, and that includes Morganstown. Prices do not change with location.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

When to call us in Morganstown

Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.

It’s worth getting a quote if you see:

  • Holes from dropped items
  • A chip where the taps sit
  • Cracks in an acrylic bath
  • A chipped rim or side

Comparing quotes

  • How long the guarantee is and what it covers
  • Whether the colour is mixed to match
  • What prep work is covered
  • How changes to the job are handled

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.