Derbyshire · England
Bath chip & crack repair in Morley, Derbyshire
Bath repair across Morley and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Scratches you can feel with a fingernail
- Damage done while the bathroom was being fitted
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Bath repair in Morley without replacing anything
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Whether it’s deep scratches in acrylic and cracks in an acrylic bath, we can generally put it right, whatever the material.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.
- Where
- Morley (DE7)
- Region
- Derbyshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
A few problems are outside what a surface repair can do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Aftercare tips
After the repair has cured, a few habits help it last:
- A dripping tap stains enamel, so fix it early
- Give the bath a quick rinse after use
- Have new chips seen to early
- Do not leave razors or cans standing in the bath
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
When to call us in Morley
Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex until the acrylic gives way.
Customers typically contact us about:
- Chips on the rim or sides
- Damage beneath the taps
- Impact holes in acrylic
- Deep scratches in acrylic
Questions to ask before booking
- How long the guarantee is and what it covers
- How your room will be protected
- How changes to the job are handled
- What preparation is included
Covering Morley
Morley is about 3 miles south-west of Heanor, in Derbyshire. Jobs in Morley are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Morley is one of 532 towns and villages in Derbyshire where we work. We work right across the region, from Morley to Birmingham (41 miles away).
We work across DE7 and the streets around it. Streets in the area include Woodside, Main Road and Cloves Hill. We also cover the places around Morley: Brackley Gate (1 mile west), Morley Smithy (1 mile south-west), Morleymoor (1 mile south-west), Horsley (2 miles north-west) and Coxbench (2 miles west). Within a short drive, we also cover Ilkeston (4 miles east), Long Eaton (8 miles south-east), Belper (4 miles north-west), Heanor (3 miles north-east), Ripley (5 miles north) and Langley Mill (4 miles north-east).
Landmarks near Morley
We visit homes around Morley Primary School and Church of St John the Baptist and the streets around them. The nearest railway station is Duffield station, roughly 3.3 miles west of the centre. Further afield, we also cover the area around Denby Pottery Visitor Centre Museum (2.8 miles north) and Horston Castle (1.5 miles west).
Towns and villages near Morley
Also in Morley
The process
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes two to three hours for most chips, and we leave the room as we found it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
- Tell us about parking, stairs or access
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Advice
Common questions in Morley
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can you repair a hole in a bath?
Generally. Send us a photo of the hole and one from under the bath if you can.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Can you repair something that’s been repaired before?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
- We come to you, anywhere in the UK
See our pricing and bath cost comparison.
How we price bath repair
Repairs from £95. We don’t charge extra for travel to Morley. The price comes down to:
- Any earlier repairs that need removing first
- Doing more than one item at once
- Where the damage is and how we get to it
- The type of damage
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
Most quotes are done from pictures alone. To help us price it:
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- A photo taken from further back
- Whether it’s been repaired or coated before
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
