Tameside · England

Bath chip & crack repair in Mossley, Tameside

We travel to Mossley for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Hairline or through cracks in acrylic
  • Snagging damage from a refit
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Mossley

Bath repair in Mossley, done in place

A damaged bath doesn’t have to mean a new bathroom. Our technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. We’re often asked to fix a cracked acrylic bath and an old repair that has yellowed or come loose, across cast iron enamel, roll-top & freestanding and pressed steel enamel.

All our work comes with a one-year guarantee, wherever you are in Tameside.

Where
Mossley (OL5)
County
Tameside
Warranty
One year on every repair
Quotes
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Repairing versus replacing in Mossley

When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.

Why Mossley clients choose us

  • Rooms protected and left tidy
  • No need to remove anything
  • One visit for most repairs
  • No extra charge for your area

Read our prices page and resurfacing vs replacement cost guide.

Aftercare tips

A little care keeps the finish looking good. We recommend:

  • Don’t leave razors or cans standing in the bath
  • Stick to mild cleaners and a soft cloth
  • Get a dripping tap fixed promptly
  • Check that an acrylic bath doesn’t move when you stand in it

Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.

Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.

What affects the price in Mossley

Repairs from £95. There are no hourly rates or hidden extras. The price depends on:

  • The size and number of damaged areas
  • How hard the colour is to match
  • Whether old repairs or coatings need taking off
  • Access to the area

We charge the same wherever you are, so there’s no premium for Mossley. What changes the price is the job itself: how much damage, what it’s made of and how many items.

How to get a fixed price

Photographing the damage takes a minute. Try to send:

  • A clear, close picture of the problem area
  • Whether it’s been repaired or coated before
  • The material, if you know it
  • One picture of the whole bath

Send us pictures of the damage and one of the entire item, and tell us you are in Mossley, and we will reply with a fixed quote.

Our work in Mossley

Mossley is about 2 miles north of Stalybridge, in Tameside. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Mossley is one of 32 towns and villages in Tameside where we work. Our jobs stretch from Mossley to Manchester (about 8 miles away).

Here we cover the OL5 postcode area. Local streets include Station Road, Alphin Square and Market Street, all of which we cover. With the A635 and A670 close by, Mossley is easy for our repair technicians to reach. We also travel to Heyheads (1 mile south-east), Luzley (1 mile south-west), Quick (1 mile north), Carrbrook (1 mile south-east) and Top of Lane (1 mile north-west). We also work in nearby towns such as Ashton-under-Lyne (3 miles south-west), Denton (6 miles south-west), Hyde (5 miles south), Droylsden (5 miles south-west), Dukinfield (3 miles south-west) and Audenshaw (5 miles south-west). As one of the bigger places in Tameside, Mossley sees plenty of our work.

Around Mossley

Locally, our jobs take us to homes close to Stamford Arms, Church of St George and Mossley Hollins High School, among other places. Mossley has its own railway station: Mossley (Manchester) station. A little further out are Ashton Arcades (3 miles south-west) and Tameside General Hospital (2.1 miles south-west). Open spaces near Mossley include Alphin and Eastwood Nature Reserve.

  • Parks and local facilities nearby include Stalybridge North (1.5 miles south)
Map of Mossley © OpenStreetMap contributors

What your bath is made of matters

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

When a repair isn’t the answer

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Wear across the whole surface, which needs re-enamelling
  • Water coming from the waste or taps rather than the bath
  • Metal that has corroded all the way through

Send us photos and we’ll tell you honestly before you book.

What we work on

  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic
  • Roll-top & freestanding
  • Whirlpool & spa baths

How the visit works

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. Allow a few hours, depending on the damage, and we’ll tell you if anything changes.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. Once it has cured, normally by the next day, the bath is ready to use.

Before we arrive

  • Ensure the area is dry
  • Mention any earlier repairs or resurfacing
  • Have somewhere for us to park nearby if possible

Get a quote

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.

Get a free quote

Advice

Your questions about bath repair in Mossley

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

How invisible is a bath repair?

On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

Can you repair a crack in an acrylic bath?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.

Do you work in Mossley?

We do. We send a technician to Mossley for every job, and the price is the same as everywhere else.

Can you repair a failed DIY repair?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

Do you charge for travel?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Can you quote from pictures?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Common problems we fix in Mossley

Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water sits around them, and any chip there soon rusts.

Typical reasons for a call-out include:

  • Chips under the taps
  • Rusty patches near the plughole
  • Chips along the edge of the bath
  • Cracks in an acrylic bath

What to look for in a quote

  • How long the guarantee is and what it covers
  • What happens if they find more damage
  • How your room will be protected
  • Whether they match the colour on site

How to compare quotes

Can I fix it myself?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.