Tameside · England
Bath chip & crack repair in Denton, Tameside
Damaged bath in Denton? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A cracked acrylic bath
- Damage done while the bathroom was being fitted
Your questions about bath repair in Denton
Do you charge for travel?
There’s no separate call-out charge. Your fixed price includes everything.
Is a cracked acrylic bath repairable?
Normally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
How much does bath repair cost in Denton?
Repairs from £95. Every job gets a fixed price from your photos. Send a close-up and a picture of the whole item and your postcode.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Bath repair at your home in Denton
A typical bath repair is a few hours’ work, and the bath is back in use the day after. You will not need a plumber or tiler, because nothing is disconnected. Common call-outs are for scratches you can feel with a fingernail and a failed DIY repair that’s discoloured or lifting, across pressed steel enamel, whirlpool & spa baths and acrylic.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Denton (M34, M18, SK5)
- Region
- Tameside
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What else we do in Denton
Our work in Denton
Denton is about 4 miles north-east of Stockport, in Tameside. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover 32 places in Tameside.
Our technicians cover all of M34, M18 and SK5 and the streets around it. You will find streets such as Market Street, Chestnut Gardens and Cooke Street, and we cover them all. Being close to the A57 and A6017, Denton is simple for us to get to. We also travel to Haughton Green (1 mile south-east), Brinnington (1 mile south-west), Reddish Vale (1 mile south-west), Audenshaw (2 miles north) and Guide Bridge (2 miles north). We also work in nearby towns such as Ashton-under-Lyne (3 miles north), Stalybridge (4 miles north-east), Droylsden (3 miles north-west), Hurst (4 miles north), Mossley (6 miles north-east) and Hattersley (3 miles east). Denton is among the bigger towns we cover in Tameside.
What’s near Denton
Typical jobs here are in homes near St Lawrence's Church, Carters Arms and Egerton Park Arts College. Other local landmarks include St Thomas More RC College (within half a mile south-west), Hyde Park (1.6 miles east) and St Mary's RC Primary School (within half a mile north). For rail, the closest station is Denton station, roughly 0.9 miles north-west of the centre. A little further out are Portland Basin Museum (2.3 miles north) and Clarendon Square Shopping Centre (1.5 miles east). Open spaces near Denton include Werneth Low and Eastwood Nature Reserve.
- Other local spots include Denton North East (0.5 miles north)
What a repair cannot fix
A repair isn’t always the answer, and we’ll tell you before we start. We cannot fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Acrylic cracks with no access behind them
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
For landlords and businesses
Landlords, letting agents and housing providers in Denton use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Looking after it afterwards
How the surface is treated afterwards matters:
- If an acrylic bath flexes, have its feet adjusted
- Get a dripping tap fixed promptly
- Protect the bath with a towel when doing jobs nearby
- Don’t leave a fresh chip for long
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Do you need bath repair in Denton?
A cracked acrylic bath normally wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the base flex.
Look out for these signs:
- Chips along the edge of the bath
- A kit repair that didn’t last
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
Before you book anyone
- How changes to the job are handled
- What aftercare is recommended
- A fixed price, and whether VAT is included
- Who will actually do the work
Repairing versus replacing in Denton
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Our prices are the same across the UK, so there is no premium for Denton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- Dust sheets down, tidy finish
- Work done at your home or business
- One price list for the whole UK
- A fixed quote before booking
Read our prices page and resurfacing vs replacement cost guide.
What happens on the day
Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a few hours from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
- Tell us about any previous repairs or coatings
Ask for a price
To get a price, send a couple of photos through our quote form or call us. We will say right away if a repair is the right fix.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
