Perth and Kinross · Scotland
Bath Repair in Moulin
Bath repair across Moulin and nearby, done in a single visit in most cases.
- Repairs from £95
- An old repair that has yellowed or come loose
- Holes from dropped items
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, a new panel is often needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.
Why Moulin clients choose us
- One-year guarantee on every repair
- We will tell you if it’s not worth repairing
- Same prices wherever you are
- CHAS and Constructionline accredited
See our pricing and resurfacing vs replacement cost guide.
About our bath repair in Moulin
Most of our bath repairs take a few hours, and the bath is back in use the day after. You will not need a plumber or tiler, because nothing is disconnected. We regularly repair pressed steel enamel, cast iron enamel and roll-top & freestanding, and common reasons people get in touch are a cracked acrylic bath and deep scratches in acrylic.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Moulin (PH16)
- Region
- Perth and Kinross
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It normally takes a morning or an afternoon, and you can get on with other things while we’re there.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
- Keep a parking space free if you can
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Avoid scourers, wire wool and gritty cream cleaners
- Get any new chip repaired before it rusts
- Store metal items away from the bath
- Check that an acrylic bath doesn’t move when you stand in it
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Landlord and trade work in Moulin
If you manage property in Moulin, we will quote for several properties at once. Send photos for each one and we’ll price them together.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Your questions about bath repair in Moulin
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Moulin.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Will I be able to see the repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
Do you work in Moulin?
Yes. We cover the whole UK and travel to Moulin and the rest of Perth and Kinross. Send pictures and we will quote, or call 0345 017 0787.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Towns and villages near Moulin
What else we do in Moulin
What a repair cannot fix
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- A bath that moves underfoot, until its support is fixed
- Water coming from the waste or taps rather than the bath
- Cracks in parts of an acrylic bath we cannot get to from below
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
What bath repair costs
Prices start from £95. We don’t charge extra for travel to Moulin. The price depends on:
- Unusual colours or finishes
- How many items we do on one visit
- What the surface is made of
- The type of damage
Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
Most quotes are done from photos alone. To make it quick:
- Natural light rather than flash
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
Upload photos of the damage and a wider shot of the entire item, and tell us you’re in Moulin, and we will come back with a fixed quote.
Do you need bath repair in Moulin?
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Look out for these signs:
- A failed DIY repair that’s discoloured or lifting
- Holes from dropped items
- Cracks in an acrylic bath
- Rust spots around the plughole
Comparing quotes
- Whether the price is fixed and includes VAT
- How soon you can use it again
- The length of the guarantee and what it covers
- How the room is protected while they work
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Moulin and the surrounding area
Moulin is about 17 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Moulin is one of 107 towns and villages in Perth and Kinross where we work. Our nearest city page is Edinburgh, about 57 miles away.
All of PH16 is covered. Streets in the area include Manse Road, Duff Avenue and Baledmund Road, and we cover them all. If you are just outside Moulin, we cover Pitlochry (1 mile south), Port na Craig (1 mile south), Grandtully (4 miles south-west), Ballinluig (4 miles south-east) and Little Ballinluig (5 miles south-west).
Landmarks near Moulin
Typical jobs here are in homes near The Old Mill Inn, Faskally Forest and Moulin Church, among other places. For rail, the closest station is Pitlochry station, roughly 0.8 miles south-west. Well-known places in the area include Pitlochry Community Hospital (0.9 miles south-west) and Black Castle of Moulin (under half a mile south-east). Not far away are Loch Broom.
About our accreditations · Every repair comes with a one-year guarantee.
