Perth and Kinross · Scotland
Bath Repair for Port na Craig homes
We travel to Port na Craig for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips under the taps
- Scratches you can feel with a fingernail
Bath repair at your home in Port na Craig
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. If you are dealing with cracks in an acrylic bath and a chip where the taps sit, we can help, on cast iron enamel, roll-top & freestanding and whirlpool & spa baths alike.
Whatever the size of the job, it’s backed by a one-year guarantee in Port na Craig and across Perth and Kinross.
- Area
- Port na Craig (PH16)
- Region
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Port na Craig?
Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why Port na Craig customers choose us
- Same prices wherever you are
- Colour-matched on site
- Repair technicians who travel to you, UK-wide
- A year’s guarantee on all work
Take a look at our prices page or guide to resurfacing and replacement costs.
Honest limits
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we can’t reach from underneath
- Wear across the whole surface, which needs re-enamelling
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Also near Port na Craig
What else we do in Port na Craig
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes two to three hours for most chips. Before we leave, we explain how soon it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Have a window or extractor fan available
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
Ask for a price
For a price in Port na Craig, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- The colour and finish to match
- Any earlier repairs that need removing first
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from pictures
When you take your photos, these tips help us give you a firm price:
- Natural light rather than flash
- Where you are, by postcode
- Something in shot to show the size
- A photo taken from further back
To get a price, send a couple of pictures through our quote form or ring us. We will say right away if a repair is the right fix.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Our work in Port na Craig
Port na Craig is about 17 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Whether you’re in the middle of Port na Craig or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Port na Craig is one of 107 towns and villages in Perth and Kinross we cover. Our jobs stretch from Port na Craig to Edinburgh (about 56 miles away).
Postcode districts we cover here: PH16. From Foss Road, Ferry Road and Bruach Lane or a nearby road, we can come to you. Main roads around Port na Craig include the A924, which makes travel easy. Neighbouring places we cover include Pitlochry (1 mile north), Moulin (1 mile north), Grandtully (3 miles south-west), Little Ballinluig (4 miles south-west) and Ballinluig (4 miles south-east).
Near you in Port na Craig
In Port na Craig, that means homes near Baptist Church, Faskally Forest and Dundarach Hotel and the streets around them. Port na Craig has its own railway station: Pitlochry station. Other landmarks nearby include Black Castle of Moulin (1 mile north-east) and Atholl Palace Museum (0.6 miles north-east). The countryside around Port na Craig includes Loch na Bà.
Questions from Port na Craig
How long does the repair take to cure?
Usually within a day, depending on the repair.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
Something went through my bath. Can it be fixed?
Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Can you redo an old repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Give the bath a quick rinse after use
- Have new chips seen to early
- A dripping tap stains enamel, so fix it early
- Use a soft cloth and washing-up liquid for everyday cleaning
There’s nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
When to call us in Port na Craig
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
Clients usually contact us about:
- A failed DIY repair that is discoloured or lifting
- Holes from dropped items
- Rust spots around the plughole
- A chipped rim or side
Before you book anyone
- Aftercare advice
- A fixed quote, and whether VAT is included
- How the colour is matched
- Whether a trained technician does the job
About our accreditations · Every repair comes with a one-year guarantee.
