Perth and Kinross · Scotland
Bath chip & crack repair in Blairgowrie and Rattray, Perth and Kinross
Bath repair in and around Blairgowrie and Rattray: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Holes from dropped items
- Rusty patches near the plughole
Prices and what affects them
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- Any earlier repairs that need removing first
- The material
- Doing more than one item at once
- How hard the colour is to match
The price reflects the work involved, not your postcode. The full price is agreed before you book.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- A close-up of the damage, in focus
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
- Details of any past repairs
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Bath repair in Blairgowrie and Rattray, done in place
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. We are often asked to fix chips on the rim or sides and damage done while the bathroom was being fitted, across cast iron enamel, roll-top & freestanding and whirlpool & spa baths.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Where
- Blairgowrie and Rattray (PH10)
- County
- Perth and Kinross
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Blairgowrie and Rattray
Blairgowrie and Rattray is about 14 miles north of Perth, in Perth and Kinross. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. Blairgowrie and Rattray is one of 107 towns and villages in Perth and Kinross we cover. You can also see our page for Edinburgh, about 45 miles away.
Here we cover the PH10 postcode area. From High Street, Mitchell Square and Back Brae or a nearby road, we can come to you. Main roads around Blairgowrie and Rattray include the A93 and A923, which makes travel easy. Close by, we cover Rattray (1 mile north-east), Carsie (2 miles south), Kinloch (2 miles west), Meikleour (4 miles south) and Coupar Angus (4 miles south-east). We also work in nearby towns such as Perth (14 miles south), Letham (14 miles south), Scone (12 miles south), Tulloch (13 miles south), Alyth (5 miles north-east) and Oakbank (15 miles south). Being one of Perth and Kinross’s larger places, Blairgowrie and Rattray is somewhere we visit often.
Local landmarks in Blairgowrie and Rattray
We visit homes around South Free Church, The Ericht Ale House and Blairgowrie High School and the streets around them. A little further out are Lethendy House (3.2 miles south-west) and Blairgowrie Community Hospital (under half a mile south-west). For a walk, there’s Rae Loch and Hill of Alyth.
More services for Blairgowrie and Rattray
Questions from Blairgowrie and Rattray
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Will the repair show?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
Can you fix rust around the plughole?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we’ll ask for another angle.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Which areas do you work in?
We cover the whole UK, including Blairgowrie and Rattray and the rest of Perth and Kinross. Just include your postcode and we’ll confirm dates.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
When a repair isn’t the answer
In fairness, some problems need a different fix:
- Metal that has corroded all the way through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send photos and we’ll say what we think.
Materials we work on in Blairgowrie and Rattray
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
What we’re called out for in Blairgowrie and Rattray
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
Typical reasons for a call-out include:
- Scuffs and scratches in the surface
- Hairline or through cracks in acrylic
- Chips on the rim or sides
- A hole punched through by something heavy
What to look for in a quote
- How changes to the job are handled
- How soon you can use it again
- Whether cleaning and preparation are in the price
- How the room is protected while they work
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
The process
We work cleanly and quietly. We protect the area first, then the job itself takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
Getting a price
The quickest way to a price is to send two or three pictures through our quote form or call us. We will say straight away if a repair is the right fix.
Advice
Work for landlords and builders
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Landlords, letting agents and housing providers in Blairgowrie and Rattray use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Make sure an acrylic bath is firm underfoot
- Do not leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
- Use a soft cloth and washing-up liquid for everyday cleaning
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
About our accreditations · Every repair comes with a one-year guarantee.
