Oxfordshire · England
Bath chip & crack repair in Moulsford, Oxfordshire
Bath repair for Moulsford, without a refit. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- Rust spots around the plughole
- Holes from dropped items
How we handle bath repair in Moulsford
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Whether it’s chips along the edge of the bath and a kit repair that didn’t last, we can help, on cast iron enamel, pressed steel enamel and whirlpool & spa baths alike.
You get a one-year guarantee, the same in Moulsford as everywhere else we work.
- Where
- Moulsford (OX10)
- Region
- Oxfordshire
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
We will always be straight with you, so here’s what a repair won’t do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
- A bath that moves underfoot, until its support is fixed
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
How to look after the repair
Simple care helps the repair last. Our advice:
- A dripping tap stains enamel, so fix it early
- Check that an acrylic bath doesn’t move when you stand in it
- Don’t leave a fresh chip for long
- Give the bath a quick rinse after use
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
What we do, step by step
There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. Most visits take a few hours, depending on the damage.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the day after.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
Getting a price
The quickest way to a price is to send two or three photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
For landlords and businesses
If you manage property in Moulsford, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Places near Moulsford
Other services in Moulsford
Repair or replace: which is better?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why book with us
- Free fixed quotes from pictures
- Colour mixed on the day to match
- CHAS and Constructionline accredited
- Typically one visit, start to finish
See our pricing and bath cost comparison.
About Moulsford
Moulsford is about 6 miles south-east of Didcot, in Oxfordshire. Jobs in Moulsford are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. We cover 443 places across Oxfordshire, from the larger towns to small villages. We work right across the region, from Moulsford to London (46 miles away).
Every address in OX10 is covered, from the main roads to the quietest streets. Streets in the area include The Street, Glebe Close and Willow Court Lane, all of which we cover. We also cover the places around Moulsford: South Stoke (1 mile east), Cholsey (1 mile north), North Stoke (2 miles north-east), Streatley (2 miles south) and Goring (2 miles south). Within a short drive, we also cover Oxford (14 miles north), Didcot (6 miles north-west), Abingdon-on-Thames (10 miles north-west), Thame (15 miles north-east), Wantage (12 miles west) and Henley-on-Thames (11 miles east).
Landmarks near Moulsford
Locally, our jobs take us to homes close to South Stoke Primary School, Cranford House School and Church of St John the Baptist and the streets around them. The nearest railway station is Cholsey station, roughly 1.3 miles north. A little further out are Wallingford Castle (3.7 miles north). The countryside around Moulsford includes Withymead Nature Reserve and Churn Hill.
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we look at:
- The type of damage
- How easy the damage is to reach
- Any earlier repairs that need removing first
- The material
Our prices are the same across the UK, with no extra for Moulsford. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- Natural light rather than flash
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- What it’s made of, if you know
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Signs you need bath repair in Moulsford
Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
It’s worth getting a quote if you see:
- Impact holes in acrylic
- Rust by the waste and overflow
- Chips along the edge of the bath
- A failed DIY repair that’s discoloured or lifting
Before booking anyone
- How long it needs to cure
- How long the guarantee is and what it covers
- Whether they match the colour on site
- Whether a trained technician does the job
Questions from Moulsford
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Is a cracked acrylic bath repairable?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
What happens after I send pictures?
We come back with a fixed quote, usually with dates to choose from. There’s no obligation to book.
Do you cover the entire of Oxfordshire?
All of Oxfordshire, and the rest of the UK. Travel is included in the price.
About our accreditations · Every repair comes with a one-year guarantee.
